Published by ams-OSRAM AG Tobelbader Strasse 30, 8141 Premstaetten, Austria Phone +43 3136 500-0 ams-osram.com © All rights reserved | 2023-02-16 1 | Version 1

PLPT9 450LB_E A01 Blue Laser Diode in TO90 Package Applications - Appliances & Tools - Projection & Display - Static Forward Lighting - Corrosion Robustness Class: 1B - Qualifications: Depending on the mode of operation, these devices emit highly concentrated visible light which can be hazardous to the human eye. Products which incorporate these devices have to follow the safety precautions found in IEC 60825 “Safety of laser products”. - Typical emission wavelength: 447 nm - Efficient radiation source for cw and pulsed operation - TO90 package - ESD protection diode - Laser diode isolated against...

Ordering Information  Type Peak output power  typ. Popt Ordering Code

Maximum Ratings Parameter Operating temperature Storage temperature Junction temperature Peak output power 1) Tcase ≤ 60 °C Reverse current Soldering temperature tmax = 10 sec Operation outside these conditions may damage the device. Operation at the maximum ratings may influence lifetime.

Characteristics Popt = 3.5 W; Tcase = 25 °C Parameter Beam divergence (1/e²) parallel to pn-junction Beam divergence (1/e²) perpendicular to pn-junction Threshold current Total power dissipation Thermal resistance junction case real

Wavelength Groups Tcase = 25 °C Group Peak Wavelength 3) Popt = 3.5 W min. peak Peak Wavelength 3) Popt = 3.5 W max. peak Forward Current Groups Tcase = 25 °C Group Forward Current 2) Popt = 3.5 W min. IF Forward Current 2) Popt = 3.5 W max. IF

Relative Spectral Emission Optical Output Power Forward Voltage Popt = f (IF)

Max. Permissible Opt. Output Power Popt = f (Tc)

Dimensional Drawing Further Information: Approximate Weight: Corrosion test:

Electrical Internal Circuit

300 10 s max., max. contact time 5 s per wave Second wave Continuous line: typical process Dotted line: process limits

Notes Depending on the mode of operation, these devices emit highly concentrated visible and non visible light which can be hazardous to the human eye. Products which incorporate these devices have to follow the safety precautions given in IEC 60825-1. Subcomponents of this device contain, in addition to other substances, metal filled materials including silver. Metal filled materials can be affected by environments that contain traces of aggressive substances. Therefore, we recommend that customers minimize device exposure to aggressive substances during storage, production, and use. Devices...

Disclaimer Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version on our website. Packing Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office. By agreement we will take packing material back, if it is...

Brightness: The brightness values are measured with a tolerance of ±11%. Operating/Forward current: IF is measured with an internal reproducibility of ±7 % (acc. to GUM with a coverage factor of k = 3). Wavelength: λpeak is measured with an internal reproducibility of ±0.3 nm (acc. to GUM with a coverage factor of k = 3). Forward Voltage: The forward voltages are measured with a tolerance of ±0.1 V. Typical Values: Due to the special conditions of the manufacturing processes of semiconductor devices, the typical data or calculated correlations of technical parameters can only reflect statistical...

Revision History Version Initial Version

Published by ams-OSRAM AG Tobelbader Strasse 30, 8141 Premstaetten, Austria Phone +43 3136 500-0 ams-osram.com © All rights reserved