*mydirectindustry

Catalogs
ams Osram
Enstackable clips

Enstackable clips

Product catalog summary

Overview: This document provides technical specifications and guidelines for a rectangular mounting part designed for 5 mm LEDs, compliant with RoHS standards and produced by OSRAM Opto Semiconductors.

Specifications:

Package: Rectangular mounting part for 5 mm LED, made of grey synthetic material.
Compatibility: Designed specifically for use with 5 mm radial LEDs from OSRAM Opto Semiconductors.
Assembly: Suitable for hand assembly.
Operating Temperature: -40°C to 85°C.
Storage Temperature: -40°C to 55°C.
Material: Housing made from PC UL 94 black.

Applications:

Can be equipped with either 3 mm or 5 mm LEDs.
Multiple components can be installed in series.

Ordering Information:

Type: Winkelhalter 5mm
Color: Grey
Ordering Code: Q62902B0155F2

Maximum Ratings:

Operating temperature range: -40°C to 85°C.
Storage temperature range: -40°C to 55°C.

Material Data:

Solderability: Compliant with DIN IEC 68-2-20 (260°C < 5 sec).
Climate: GPF DIN 40040.

Disclaimer: Components may contain hazardous substances due to technical requirements. For life-support devices, express written approval from OSRAM OS is required.

Packaging and Recycling: Recycling operators should be used for packaging materials. OSRAM will accept sorted packaging materials by agreement, with transport costs borne by the sender.

Glossary:

Tolerance of Measure: Dimensions specified in mm (inch).
TTW Soldering: Package can withstand TTW-soldering heat according to CECC 00802.

Catalog excerpts

Maximum RatingsGrenzwerte Parameter Symbol Values Unit Bezeichnung Symbol Werte Einheit Operating temperature rangeBetriebstemperaturT > op -40 ... 85CStorage temperature rangeLagertemperaturT > stg -40 ... 55аC Material DataWerkstoffdaten SolderabilityLtbarkeitDIN IEC 68-2-20 (260C < 5 sec.)ClimateKlimaGPF DIN 40040Housing MaterialHousing MaterialPC UL 94 blackChemical Data according to Chemische Daten nachCAS 9002-88-4-CAS > 2006-07-162 size="-1">

Open the catalog to page 2

Recommended Solder Pad page: 6 , 6 Empfohlenes Ltpaddesign Seite: 6 , 6 TTW Soldering / Wellenlten (TTW) 4.8 (0.189) 4 (0.157) OHLPY985 Revision History: 2006-07-16 Previous Version: 2006-06-12 Page Subjects (major changes since last revision) Date of change 1ordering code2006-06-02 > 2006-07-164 size="-2">

Open the catalog to page 4

Bitte beachten! Lieferbedingungen und nderungen im Design vorbehalten. Aufgrund technischer Anforderungen kĶnnen die Bauteile Gefahrstoffe enthalten. Fr weitere Informationen zu gewnschten Bauteilen wenden Sie sich bitte an unseren Vertrieb. Falls Sie dieses Datenblatt ausgedruckt oder heruntergeladen haben, finden Sie die aktuellste Version im Internet > Verpackung Benutzen Sie bitte die Ihnen bekannten Recyclingwege. Wenn diese nicht bekannt sein sollten, wenden Sie sich bitte an das n켤chstgelegene Vertriebsbro. Wir nehmen das Verpackungsmaterial zurck, falls dies vereinbart wurde und das Material...

Open the catalog to page 5

Tolerance of Measure: Dimensions are specified as follows: mm (inch). Matoleranz: Maߟe werden wie folgt angegeben: mm (inch) TTW Soldering: Package able to withstand TTW-soldering heat acc. to CECC 00802 Wellenlten (TTW): Gehuse h椤lt TTW-Lthitze aus nach CECC 00802 Published by OSRAM Opto Semiconductors GmbH Wernerwerkstrasse 2, D-93049 Regensburg www.osram-os.com All Rights Reserved. 2006-07-166 >

Open the catalog to page 6

All Ams Osram catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list