Catalogs >
Amptek Inc. >
DIGITAL PULSE PROCESSOR

DIGITAL PULSE PROCESSOR
4Pages

Catalog excerpts

1) DP4 Input (Preamp Output) > 2) Prelter Output(ADC Input)3) DP4 ShapedOutput > Both traces: 200 mV/div 20 M sec/div > 4) Multichannel Analyzer Output KMnMoPb >

Open the catalog to page 1

Gain Settings Four programmable coarse gain settings are available: x10.8, x20.7, x55.4, x106.2.Fine gain is adjustable between 0.75 and 1.25. RS232 A standard RS232 serial interface is available at up to 57.6 Kbaud. USB Standard USB 1.1 interface (USB 2.0 compatible). Full Scale 100 mV input pulse @ x10 gain. I > 2 C The C contains an I > 2 C port, allowing the DP4 to interface with peripherals. Pulse Shape Peaking and Flat Top Times Trapezoidal. A semi-gaussian amplifier with shaping time τ has a peaking time of 2.2 τ and is comparable in performance with the trapezoidal shape of the same...

Open the catalog to page 2

There are two distinct software packages that are needed for the DP4 (both included): embedded software that runs on the controller on the DP4, and acquisition and control software that runs on the attached computer. These are fully functional pro- grams, allowing complete control of the hardware. With the DP4, the user may tailor the software for both the em-bedded processor and the interface to do exactly what is required for a particular application. This is a key advantage to the use of the DP4. > The embedded software is responsible for controlling the pulse processing, controlling the...

Open the catalog to page 4

DIGITAL PULSE PROCESSOR 4Pages

Catalog excerpts

All Amptek Inc. catalogs and technical brochures

DIGITAL PULSE PROCESSOR
4Pages