Powerlite” DLS Plus High Energy Nd:YAG The Powerlite DLS Plus Series is an ideal solution when higher levels of green energy are required for the pumping of Ti:Sapphire laser systems. High energy, high repetition rate Ti:Sapphire systems are using multiplexed standard lasers as the amplifier pump source. When more energy is required, more lasers are needed. At 2 J and 2.5 J at 532 nm, the Powerlite DLS Plus Series is the industry leader in terms of energy and beam quality. For dollars per Joule, the Powerlite DLS Plus Series lasers make economic sense. Industry: > Material sorting (recycling) > Weld inspection > Cleaning > LIBS Science: > LIDAR, LIF, LIBS, PLIF > Thomson Scattering > Laser Thermal Annealing > Pump Source Medical: > Skin Surfacing > Tattoo Removal > Pump Source > Medical device manufacturing Key Features > Distributed intelligence power supply architecture. > Rack mounted and modular components for easier maintenance and service > New cooling group with active digital control for acurate temperature monitoring and improved thermal management > LabView drivers available

1 Using Type II doubler 2 Using Type I doubler 3 FWHM full width half max 4 FWHM (1cm-1 = 30 GHz) 5 Full angle for 86% (1/e2) 6 99.9% shots will be <±30 prads with AT^ <±3°C 7 With respect to external trigger 8 The first value represents shot-to-shot for 99.9% of pulses, the second value represents RMS 9 Average for 8 hours with AT±3°C All specifications at 1064 nm unless otherwise noted. Electrical Service

Specifications plus plus 2 J plus 2.5 J 10 A least squares fit to a Gaussian profile. A perfect fit would have a coeffficient of 1. 11 Within FWHM points near field at 1 meter. Specifications are subject to change without prior notice | © 08-2019 | Ref. 1267-b

Energy Through Efficiency