MAIN CHARACTERISTICS LJT 25-P11 x 500 A 500A power contact cylindrical connector. • Corrosion resistance olive drab cadmium-plate aluminium or electroless nickel • Keying achieved by different key / keyway locations • Quick positive coupling 3 point bayonet lock system • Insulation resistance at ambient under 500 Vdc > 5 000 Mohms• 1 size 4/0 contact• Temperature range -65 °C / + 175 °C • Contact rating current capability 500 A The Amphenol Socapex power connector LJT 25-P1 (1 x 500 A) has been developed for military applications, when high power q supply is required as well as EMI RFI protection for peripheral electronic devices. LJT 25-P1 connector provides 1 size 4/0 power contact in a 25 shell size according to MIL-DTL-38999 Series I standard. The socket contact is equipped with the Radsok® device which offers a high durability (20000 mating cycles) as well as a very low contact resistance and insertion force. * : for other cable designations, Amphenol Socapex is ready to realize pulling tests after crimping. Highperformance for power supply • Shelters • Firing posts • Motor starting

Application tools & process Warning : - Due to the power cable stiffness, a specific backshell has been designed compatible with both plug and receptacle. The standard M85049 backshells suitable for Mil-DTL-38999 Series I connectors are not compatible with this power connector. Tool references (Dubuis crimping tool) Installation instruction • For size 00 Contact - Crimping pliers - Pliers adapter • Wire preparation 922521 - Before crimping, it is a must to place over the wire : 922522 - The DR25 % sleeve (insulation heat shrink sleeve) 922518-90 - The clip for the contact retention -Contact positioner...