1. Catalogs
  2. AMPHENOL SOCAPEX
  3. AMPHENOL WARRIOR GRIP & WARRIOR-LOK SERIES

AMPHENOL WARRIOR GRIP & WARRIOR-LOK SERIES
1 /6Pages

AMPHENOL WARRIOR GRIP & WARRIOR-LOK SERIES

AMPHENOL WARRIOR GRIP & WARRIOR-LOK SERIES
1 /6Pages

Catalog excerpts

AMPHENOL WARRIOR GRIP & WARRIOR-LOK SERIES-1

AMPHENOL WARRIOR GRIP & WARRIOR-LOK SERIES World's only 10 Amp Connector Fully Compatible with Nett Warrior Products 10 AMPS AMPHENOL’S WARRIOR GRIP SERIES IS THE ONLY NETT WARRIOR-STYLE CONNECTOR TO BRING FAST CHARGING 10 AMP CAPABILITY DIRECTLY TO THE WARFIGHTER Leveraging Amphenol’s extensive experience with the 2M804 push-pull series, Warrior Grip connectors are designed to offer a solution that exceeds the rigorous requirements of the US Army’s Nett Warrior program. The Warrior Grip series brings with it a number of enhancements to the standard 2M804 design, including a unique mate-force rating for even quicker disconnect and selectively plated shells for improved conductivity. With these enhancements, the Warrior Grip series is tailor made for nearly any soldier-worn application. When paired with our 10 Amp Warrior Grip Socket Contact system, you can get even more power out of your application in the same lightweight package. Designed to push the size #23 contact to new limits without the downside of excessive heat rise, the Warrior Grip socket contact system is fully backwards compatible with existing size #23 pin designs. The system yields an average 26% improvement in heat rise when compared to the competition, and meets all applicable MIL-STD-1472 temperature exposure limits.* Selective plating for improved conductivity Gold plated EMI spring for robust shielding and durability FEATURES AND BENEFITS • COMPATIBILITY: Intermateable with Existing Nett Warrior Push-Pull Connectors • POWER: Warrior Grip Contact System 10 Amp Capability in a Size #23 Contact • LOCKED & LOADED: Unmating Force of 13 ± 3 lbs; won’t disconnect until they should • VERSATILITY: Diverse Range of Mounting Options for Both Plugs and Receptacles Textured shell design for enhanced grip and easy disconnect Warrior Grip Socket contact system for 10 Amps per cavity * Refer to table on page 2 Peter Cook • Phone: (607)267-8211 • Email: [email protected] www.amphenol-aerospace.com Integrated banding platform for easy

 Open the catalog to page 1
AMPHENOL WARRIOR GRIP & WARRIOR-LOK SERIES-2

COMPARISON HEAT RISE CHART 7.5 & 10 AMPS Test Setup: TIME, MINUTES Standard Nett Warrior Warrior Grip Max T-Rise - Warrior Grip 7.5A • All contacts terminated to 18” of 22AWG wire • Contact positions 1 and 6 were energized • Data was recorded directly from a thermocouple fixed to the exterior of the connector. • The connector was elevated 7” above the bench to avoid any alteration of data from the surface of the bench • A barrier was placed around the connector to isolate it from ambient influence • All data shown represents testing done with standard pin contacts Ambient Temperature Ranges Maximum...

 Open the catalog to page 2
AMPHENOL WARRIOR GRIP & WARRIOR-LOK SERIES-3

WARRIOR GRIP - RECEPTACLES WARRIOR GRIP RECEPTACLES Description Contact Style Amphenol Part Equivalent Part Numbers Number 10-742386-06S Cable Mount Receptacle CWB Wing Mounted Receptacle 1 Rear Jam Nut Bulkhead Mount Receptacle * Will achieve advertised heat rise improvements when mated to any standard plug on next page. Peter Cook • Phone: (607)267-8211 • Email: [email protected] www.amphenol-aerospace.com

 Open the catalog to page 3
AMPHENOL WARRIOR GRIP & WARRIOR-LOK SERIES-4

Amphenol Aerospace WARRIOR GRIP PLUGS Description Contact Amphenol Part Equivalent Part Numbers Amphenol 10 Amp Style Number . Mjl 1 Cable Mount Plug Bulkhead Mount Plug Peter Cook • Phone: (607)267-8211 • Email: [email protected]

 Open the catalog to page 4
AMPHENOL WARRIOR GRIP & WARRIOR-LOK SERIES-5

AMPHENOL WARRIOR-LOK SERIES Intermates with standard Nett Warrior Plugs Positive-Locking operating sleeve prevents accidental unmating Proven Ball-Lock Device Provides Lower Mating/ Unmating Forces INTRODUCING THE FIRST EVER LOCKING 2M804-STYLE RECEPTACLE, DESIGNED SPECIFICALLY FOR THE MODERN WAR-FIGHTER Amphenol has developed the first locking receptacle connector for the Nett Warrior program and other soldier-worn applications. Fully compatible with all Nett Warrior plugs, the Warrior-Lok receptacle features an integrated locking mechanism to prevent accidental unmating. As an added benefit,...

 Open the catalog to page 5
AMPHENOL WARRIOR GRIP & WARRIOR-LOK SERIES-6

Amphenol Aerospace WARRIOR-LOK RECEPTACLES Description * Will achieve advertised heat rise improvements when mated to any standard plug on next page. Peter Cook • Phone: (607)267-8211 • Email: [email protected] www.amphenolmao.com

 Open the catalog to page 6

All AMPHENOL SOCAPEX catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.