*mydirectindustry

TTA-ASG100H

Product catalog summary

Overview: The TTA-ASG100H is a Tower Mounted Amplifier designed for AWS bands, featuring twin TMA and AISG v2.0 with fixed gain. It aims to enhance coverage and capacity while minimizing site acquisition issues and reducing network expansion costs.

Ordering Options: The amplifier is available with two types of connectors: 7/16-DIN Female Connectors (Model: TTA-ASG100H) and 4.3/10 Female Connectors (Model: TTA-ASG100H-43F).

RF Characteristics:

Downlink (TX) Path: Frequency Band: 2110-2170 MHz, Insertion Loss: 0.3 dB, Continuous Average Power: 200 W, Intermodulation: -125 dBm in RX band.
Uplink (RX) Path: Frequency Band: 1710-1770 MHz, Gain: 12 dB, Noise Figure: 1.3 dB, Insertion Loss in Bypass Mode: 2.0 dB, Output IP3: 25 dBm.

Power Supply and Alarm: The amplifier operates in two modes: Current Window Alarm Mode (DC 9 to 15 V, Power 80 to 130 mA) and AISG Mode (DC 9 to 30 V, Power < 2 W). Alarm Mode operates at 170 to 180 mA with 3GPP/AISG v2.0 compliance.

Environmental Characteristics: The operating temperature range is -40° to +65° C, with storage conditions compliant with ETS 300 019-1-1, Class 1.2. It has an ingress protection rating of IP67 and complies with EMC standard EN 301 489-8 and safety standard EN 60950. The minimum MTBF is 1.2 Mh/TMA.

Mechanical Characteristics: The dimensions are 174 x 152 x 50 mm, and it weighs 2.5 kg. It includes connectors for BTS and ANT, available in 7/16-DIN Female or 4.3/10 Female types, and an AISG connector with 8-Pin Circular Female. The color is NCS 1502-R, and it can be mounted using hose clamps in any orientation.

Block Diagram: The block diagram includes DC power extraction, lightning protection, LNA, supervision, and AISG current alarm functionalities.

Note: Performance parameters are typical and may vary due to manufacturing and operational conditions. Product improvements may occur without notice.

Catalog excerpts

^SkAmphenol ^j^~ANTENNA SOLUTIONS Tower Mounted AmplifierTTA-ASG100HAWS | Twin TMA | AISG v2.0 | Fixed Gain • AWS, twin TMA, AISG v2.0, fixed gain • Increases coverage and capacity • Helps to minimize site acquisition issues • Reduces the cost of network expansion Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.

Open the catalog to page 1

Tower Mounted Amplifier TTA-ASG100H AWS | Twin TMA | AISG v2.0 | Fixed Gain Mechanical Characteristics Dimensions - Length x Width x Depth Gross Weight 2 Connectors / 7/16-DIN Female or 4.3/10 Female 2 Connectors / 7/16-DIN Female or 4.3/10 Female Connectors (type) 1 Connector / 8 -Pin Circular Female Hose clamps, arbitrary orientation LNA Supervision and AISG current Alarm DC extractor and Lightning Protection DC extractor and Lightning Protection Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational...

Open the catalog to page 2

TTA-ASG100H

TTA-ASG100H

Catalog excerpts

All Amphenol Antenna Solutions catalogs and technical brochures