Pneumatic Control System Accessories Models 2185, 2690, 2760, 2768, 2790B and 4125 Overview All of the accessories shown are for use with other AMOT safety and sequencing components in any pneumatic control systems. Product Description Model 2185 – Used to restrict flow in timing circuits or used to prevent damage due to sudden application of pressure. Available in multiple diameters. Model 2760 Check Valve Model 2768 Quick Release Valve Model 2790B Shuttle Valve Model 4125 Vent Closure Model 2690 – Used in timing circuits in conjunction with the 2185 orifice. It is used to delay the pressure build up required to open or pressure loss to close a valve. Model 2760 – Used in circuits to control the direction of flow. Model 2768 – Used to dump pressure quickly on devices with large volumes such as valve bonnets or long tubing runs. Model 2790B – Enables continuous pressurization of a single device in a circuit as the pressure transitions from one source to a different source. Model 4125 – Used on vent ports, it allows flow in a single direction to prevent dirt, corrosive atmospheres, and insects from entering the control systems.

Pneumatic Control System Accessories Specification Flow coefficient Maximum pressure Specification Material Stainless steel Stainless steel with material certification Specification Material Flow coefficient

Pneumatic Control System Accessories 2768 Quick Release Valve Flow coefficient Shipping weight Specification Material Pressure differential to operate Flow coefficient 4125 Vent Closure for 1/4 NPT Thread Specification Body material Valve material Silicon rubber Used for excluding dirt, corrosive atmospheres, and insects from critical internal working parts of controls. (Note: This is not a “breather”, It will exhaust only.)

Pneumatic Control System Accessories How to order UseTo Order: Pneumatic Control System Accessories How the table below to select the model code of your pneumatic control system accessory Order by Model Code Number Example Model Code Orifice Size and Flow Coefficient *003 and 004 are only available in 1/4 BSP(PL) Comments Basic model code Material Thread Brass 1/4 NPT* Nickle Plated Brass 1/4 NPT* Aluminum NPT Aluminum BSP (PL) Stainless Steel NPT Stainless Steel BSP (PL) Orifice Diameter Inch mm 1 0.014 0.34 2 0.031 0.8 3* 0.125 3.18 4* 0.040 1.0 5 0.062 1.57 Model Code 2690L001 Stainless Steel...

AMOT Western Way Bury St Edmunds Suffolk, IP33 3SZ England AMOT USA 8824 Fallbrook Dr Houston TX 77064 USA Asia and Australasia AMOT Shanghai Rm A308 Building A8 Jiahua Business Center 808 Hongqiao Road Shanghai 200030 China Tel +86 (0) 21 6447 9708 Fax +86 (0) 21 6447 9718 Email [email protected] AMOT Singapore 10 Eunos Road 8 #12-06 Singapore Post Centre Singapore 408600 Tel +65 6408 6265 Fax +65 6293 3307 Email [email protected]