Catalogs >
AMOT >
8072D Bulkhead Mount Controller

8072D Bulkhead Mount Controller
7Pages

Catalog excerpts

Typical applications • Position control of electrically or electro-pneumatically actuated valves • For use with AMOT type G Temperature Control Valve - see datasheet ref: Datasheet_G_Temp_Control_Valve • For engines, turbines, gear boxes and heat exchangers: - charge air cooling - secondary cooling systems - fuel and lube oil preheating - co-generation - engine jacket water Key benefits • Fully programmable PID-based control - allows easy system configuration • Universal inputs - RTD's, thermocouple, or standard 4-20mA signal gives maximum system design flexibility • Can be operated in manual mode - easy maintenance and set up Key features • Max. two programmable analogue outputs • Two programmable setpoints, two parameter sets • Four limit comparators • Two timer functions • Two self-optimization procedures • RS485 interface available as an option

Open the catalog to page 1

These products are designed for high performance, fully configurable operation, and are easy to install and set up. The controller is available in two options. 8071D The 8071D is a universal PID controller for use with the AMOT electrically actuated G Valve range. The 8071D is a panel mount stand-alone controller, designed to be used with separate Solid State Relays (SSRs). 8072D The 8072D is a stand-alone panel incorporating the 8071D controller. The 8072D comprises of the 8071D controller and two SSRs, pre-wired in a wall mounting, splash-proof enclosure approved to IP67 (NEMA 6). All...

Open the catalog to page 2

The 8071D is a powerful PID controller with digital filtering that is fully user-configurable to meet the needs of a wide range of systems. It incorporates two large high brightness, high contrast displays, which indicate process and set point values. The controller features a universal input and two logic level valve control outputs. Two alarm outputs are supplied as standard. Two set points and two complete parameter sets may be programmed and selected internally or externally using electrical links. The unit is simple to configure using a structured menu system operated by four buttons...

Open the catalog to page 3

This compact, robust panel incorporates the 8071D controller and two SSRs. The panel is pre-wired; all external connections are made using standard DIN rail mounted terminal connections. The unit enclosure is approved to IP67 and is suitable for wall mounting.

Open the catalog to page 4

Electric PID Valve Controllers and SSRs 8071D, 8072D, 47581L001 SSRs (47581L001) The SSRs used within the 8072D are available separately for use with the 8071D controller. The SSRs are extremely robust, and provide high current switching to actuator motors with a switching current capacity of up to 50A. The SSRs have significantly higher performance than standard relays, providing excellent transient protection and switching life. 47581L001 Solid State Relays The arcing associated with traditional relays is completely eliminated due to zero voltage switching. Two SSRs are required per 8071D...

Open the catalog to page 5

Use the tables below to select the unique specification of your 8071 valve controller.

Open the catalog to page 6

Europe, Middle East and Africa AMOT USA 8824 Fallbrook Dr Houston, TX 77064 USA Tel +1 (281) 940 1800 Email general: sales@amotusa.com orders: orders@amotusa.com customer service: cs@amotusa.com AMOT Western Way Bury St Edmunds Suffolk, IP33 3SZ England Tel +44 (0) 1284 762222 Email info@amot.com AMOT Singapore 10 Eunos Road 8 #12-06 Singapore Post Centre Singapore 408600 Tel +65 6408 6265 Email singapore@amot.com

Open the catalog to page 7

8072D Bulkhead Mount Controller 7Pages

Catalog excerpts

All AMOT catalogs and technical brochures

8072D Bulkhead Mount Controller
7Pages