Catalog excerpts
Air Intake Shut-off Valve B TEMPERATURE RANGE : -40C - 100C MAXIMUM FLOW RATE : 3.85 kg/sec MAXIMUM CHARGE AIR PRESSURE : 5 Bar (absolute) SOLENOID VOLTAGE : 16.8 - 31.2 VOLTS SOLENOID RESISTANCE : 1.00 - 1.22 OHMS @ requires Hydraulic fracturing technology 25C; 0.74-0.92 OHMS @ -40C SOLENOID MAX CURRENT DRAW : 42.2A @ 31.2 VDC AND -40C SOLENOID INDUCTANCE : high horse power the use of heavy duty3.5 mH ±40% SOLENOID ACTUATION SEQUENCE @ 31.2VDC, 100C: MAX 2s ON, MIN 1s OFF diesel engine. Hydrocarbon release in an MIN 300s OFF MAX 2s ON, area where a diesel engine 24.0VDC, 25C: MAX 2s ON, MIN 1s OFF SOLENOID ACTUATION SEQUENCE @ is operating can lead to diesel engine runaway whichMAX 2s ON, MIN 60s OFF can SWITCH : 5 AMP RESISTIVE situation. be a highly dangerous LOAD MAX > 0.25W Once an 33kΩ SHUNT RESISTOR, ±10%, 0.4W Ø147.80 .05 Ø158.75 + .00 - .25 engine begins to run on the external fuel 33kΩ SWITCH IS OPEN WHEN VALVE IS OPEN source, turning off the ignition will have no Ø156.01 effect. The engine will continue to run and overspeed leading to mechanical failure or explosion. TheCLOSED WHENreleased 7001 series Ω SWITCH IS newly VALVE IS CLOSED 33k Air Intake Shut-off valve was designed for SECTION B-B wearVALVE SHIPPED IN of the frac industry. The the and tear CLOSED POSITION valve will effectively shut down a runaway ACTUATOR HOUSING AND VALVE diesel engine by closing off engine intake air. BODY RATED IP69K CONNECTOR : TE CONNECTIVITY 1.5mm PIN HOUSING (1718230-1) CONNECTOR CONFORMS TO ISO 15170 PINS 1&2 - SOLENOID PINS 4&6 - SWITCH ISOMETRIC VIEW FOR REFERENCE ONLY SHOWN IN OPEN POSITION DO NOT SCALE Typical Applications MATERIAL: BODY, ACTUATOR HOUSING AND ELBOW: ALUMINUM; GATE:BRASS FINISH: MASS IN kg(LB) = 15(34) MATERIAL CODE No. 1/30/2013 DRAWN BY PM DATE: REVISED DATE: DATE: APPROVED JRM 01/10/2014 THIRD ANGLE PROJECTION Corrosion resistant, anodized aluminum and stainless steel construction Heavy duty high horse power frac diesel Houston, Texas, USA; Bury St Edmunds, UK; & Shanghai, China engines, Offshore Production Engines, REVISION DETAILS ONLY Drilling Industry, Fire Trucks, Hazardous :SCALE : NTS Rated for continuous working temperature FOR THIS ISSUESTATUS © AS DATE OF ISSUE. DCN No. MODEL TITLE Material Vehicles, Ambulances, Marine from -40°C to +246°C DWG STATUS RELEASED OUTLINE DRAWING Engines, Bulk Fuel HaulersII (Tankers),LEFT 5" MTU TIER SWING GATE FILE: USA 7001572B-RZH DWG CONTROL: Designed for post-turboTOLERANCES (mm) UNLESS OTHERWISE STATED :temperatures SIZE DRAWING NUMBER ISSUE 1 SHT Power Generation (Gen Sets), Well Service 1 .XX .X .15 OF 1 C 7001572B-RZH ANGLES .5 .XXX .015 IP 367 Rated Solenoid /Actuator 2 1 Vehicles, Mining Equipment, Locomotives, Aircraft Mobile Support Equipment, Fuel Desgined for high vibration environments Transfer Pumps, Fire Pumps and any Male/female marmon flange connections other diesel engine application in the well (can be coupled directly to Cummins servicing, refinery, or mining industry MTU4000 engine intakes) (where hydrocarbon release is a risk), Position switch integrated into actuator Offshore Production Engines, Drilling housing Industry Switch is not exposed to charge air temperature/debris AMOT CONTROLS CORPORATION RESERVES PROPRIETARY RIGHTS TO THIS DRAWING AND THE DATA SHOWN THERON. IT IS SUBMITTED IN CONFIDENCE FOR QUOTATION OR ORDER OF THE PRODUCT SHOWN. THIS DRAWING AND/OR DATA ARE NOT TO BE USED OR REPRODUCED FOR ANY PURPOSE WITHOUT THE WRITTEN CONSENT OF AMOT CORPORATION. ALL DIMENSIONS IN MILLIMETERS FINISH 3.2 MICRONS REM
Open the catalog to page 1Air Intake Shut-off Valve Model 7001 RESET VALVE WITH 19mm WRENCH D 1 3 MAXIMUM FLOW RATE : 3.85 kg/sec SOLENOID VOLTAGE : 16.8 - 31.2 VOLTS (SHOWN WITHOUT ELBOW) VALVE IS OPEN SOLENOID RESISTANCE : 1.00 - 1.22 OHMS @ 25C; 0.74-0.92 OHMS @ -40C SOLENOID ACTUATION SEQUENCE @ 24.0VDC, 25C: MAX 2s ON, MIN 1s OFF MAX 2s ON, MIN 60s OFF SWITCH : 5 AMP RESISTIVE LOAD MAX > 0.25W 33kΩ SHUNT RESISTOR, ±10%, 0.4W SWITCH IS OPEN WHEN VALVE IS OPEN SOLENOID MAX CURRENT DRAW : 42.2A @ 31.2 VDC AND -40C (304.43) SOLENOID INDUCTANCE : 3.5 mH ±40% SOLENOID ACTUATION SEQUENCE @ 31.2VDC, 100C: MAX 2s ON,...
Open the catalog to page 2Standard materials Valve body Hard anodized aluminum Gate Brass Maximum intake air temperature Valve Size Net weight Max Charge Air Pressure Solenoid Seals Viton/Silicone Safety control operator Anodized aluminum Switch Actuation Sequence Max 2s ON, Min 1s OFF How to order Use the tables below to select the unique specification of your Model 7001 Intake Air Shut-off Valve: Note: AMOT does not qualify the valve for specific applications. Consult the engine and valve specifications.
Open the catalog to page 3Electrical Components: Part No. 3650268 Flange o-ring: Part No. 3648696 Americas Asia Pacific Europe, Middle East and Africa
Open the catalog to page 4All AMOT catalogs and technical brochures
-
IP1-Impact-Transmitter
2 Pages
-
4095 2-Way Vent Valve
1 Pages
-
4395 Electric Trip Switch
4 Pages
-
4103D Temperature Detector
4 Pages
-
1672 Pressure Sensing Valve
7 Pages
-
4047 Pressure Valve
5 Pages
-
4109 Vibration Sensor
7 Pages
-
Model 8402
6 Pages
-
Model 4123C
5 Pages
-
Model 4418F
9 Pages
-
Model 4420
7 Pages
-
Model 2180
6 Pages
-
XTS-W Bearing Wear Monitor (BWM)
11 Pages
-
SEDM
4 Pages
-
MPD Introduction
12 Pages
-
Control System Solutions
12 Pages
-
Chalwyn Spark Arrestors
4 Pages
-
System Selection Guide
12 Pages
-
Product Selection Guide
20 Pages
-
Intake Air Shutoff Valve
4 Pages
-
Temperature Control Valve
21 Pages
-
Metal Particle Detector
8 Pages
-
2 or 3-Way Pressure Valve
5 Pages