*mydirectindustry

Catalogs
AMOT
4395 Electric Trip Switch

4395 Electric Trip Switch

Product catalog summary

Overview: The AMOT Model 4395 Electric Trip Lever Switch is designed for manual or mechanical tripping applications where a manual reset is desired. It can be mounted in any position and requires minimal force to activate.

Key Features and Benefits:

Constructed from Gulfproofed aluminum for durability.
Environmentally sealed UL/CSA listed microswitch.
No adjustments required for operation.
Available with 1/2 NPT conduit connection or liquid-tight hub.

Typical Applications:

Replaces pneumatic model 4095.
Used in connecting rod bearing temperature detectors and broken piston rod indication.
Typically used with model 4102D.

Specifications:

Available in general purpose (4395A) and explosion-proof (4395B) versions.
Body and electrical switch body made of Gulfproofed aluminum.
Maximum ambient temperature: 150°C (300°F).
Net weight: 0.23 kg (0.5 lb).
Internal microswitch with SPDT contact arrangement.
Design temperature range: -55° to 205°C (-65°F to 400°F).
Gold contacts rated at 1A @ 125Vac/28Vdc; Silver contacts rated at 7A @ 250Vac/28Vdc.
Explosion-proof approvals: CSA, Class 1, Div 1, Groups B, C & D.
Suitable for Div 1 hazardous area installation with Intrinsically Safe Circuits (I.S.).
Connections: 1/2 FNPT or non-metallic hub.
Wire type: Shielded 3 conductor 22 gauge, Teflon sheathed, silicone rubber jacket.
Wire lengths available: 457 mm, 4572 mm, 7620 mm (18 inches, 15 ft, 25 ft).

Operation: When a Model 4102D bearing temperature detector reaches a high temperature, the trip element extends to brush the Model 4395 trip lever switch, causing a shutdown. It is designed to replace the Model 4095 when converting from pneumatic to electric/electronic controls.

Installation Factors:

Can be mounted in any position; a mounting bracket may be required.
Check switch operation by manually moving the trip lever between armed and unarmed positions while checking for continuity or alarm indication.
Wire color codes: Black (Common), Red (Normally Open), White (Normally Closed), Drain Wire (Grounded to Switch Body).
All wiring should comply with governing electrical codes.

Ordering Information: Use the provided table to select the unique specification of the 4395 Electric Trip Lever Switch, including model type, revision level, strike lever width, switch contact, connection & wire length, wire type, and any special requirements.

Contact Information: AMOT provides contact details for their offices in Europe, Africa, Americas, Asia, and Australasia for further inquiries and support.

Catalog excerpts

Electric Trip Lever Switch AMOT Model 4395 is designed for manual or mechanical tripping applications where a manual reset is desired. The unit can be mounted in any position and requires a minimal force to Typical applications • Replaces pneumatic model 4095 • Connecting rod bearing temperature • Broken piston rod indication • Typically used with model 4102D • Gulfproofed aluminum construction • Environmentally sealed UL/CSA listed • 1/2 NPT conduit connection or liquid Electric Trip Lever Switch

Open the catalog to page 1

Electric Trip Lever Switch - Model 4395 Operation When a Model 4102D bearing temperature detector reaches a high enough temperature, the trip element will extend to brush the Model 4395 trip lever switch and cause a shutdown. This device is designed to physically replace the Model 4095, when converting from pneumatic to electric/electronic controls. Installation Factors Mounting: Model 4395 can be mounted in any position. Mounting bracket may be required for most installations. Check switch for operation by manually moving the trip lever between armed and unarmed positions while checking for...

Open the catalog to page 2

Electric Trip Lever Switch - Model 4395 Dimensions - inches Use the table below to select the unique specification of your 4395 Electric Trip Lever Switch:

Open the catalog to page 3

AMOT USA 8824 Fallbrook Dr Houston TX 77064 USA AMOT Western Way Bury St Edmunds Suffolk, IP33 3SZ England Asia and Australasia AMOT Shanghai Rm 4102 - 4104 United Plaza 1468 Nanjing Road West Shanghai 200040 China Tel +86 (0) 21 6279 7700 Fax +86 (0) 21 5237 8560 Email [email protected] AMOT Singapore 10 Eunos Road 8 #12-06 Singapore Post Centre Singapore 408600 Tel +65 6408 6265 Fax +65 6293 3307 Email [email protected]

Open the catalog to page 4

All AMOT catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list