1. Catalogs
  2. AMOT
  3. 2 or 3-Way Pressure Valve

2 or 3-Way Pressure Valve

2 or 3-Way Pressure Valve

2 or 3-Way Pressure Valve

Product catalog summary
Overview
AMOT Model 4047 is a versatile low pressure valve that can function as a 2-way or 3-way valve. It is designed for applications involving low pressure settings from 0.007 bar (0.1 psi) to 0.77 bar (11.2 psi). The valve is suitable for sensing low pressure in gases, liquids, and for liquid level control. It can also detect overloads in gas engines by sensing vacuum pressure in the intake manifold.

Key Features and Benefits
  • 3-way valve with balanced force design.
  • Pressure can be applied at any port.
  • Easy replacement of Buna N (Nitrile) "tadpole" seals.
  • Bubble-tight seals with a center dead spot to prevent port overlap.
  • Standard Gulfproof finish for durability.

Typical Applications
  • Sensing low pressure or vacuum in water, air, natural gas, oil, etc.
  • Detection of overload on gas engines.
  • Sensing vacuum in intake air manifolds.

Specifications
  • Valve body and diaphragm housing made of Gulfproofed aluminum.
  • Valve spool made of glass reinforced Ryton.
  • Standard seals and diaphragm are Buna N (Nitrile).
  • Maximum operating pressures at ports: 8.6 bar (125 psi).
  • Maximum continuous control pressure at diaphragm: 1.4 bar (20 psi).
  • Proof pressure for diaphragm: 2.1 bar (30 psi).
  • Maximum temperature: 66°C (150°F).
  • Valve free flow area: Kv = 1.0, Cv = 1.2.
  • Net weight: 2.3 kg (5 lbs).

Operation
  • 2-Way: Opens on rising or falling pressure depending on port configuration.
  • 3-Way: Similar to 2-way but without plugged ports, with a dead spot to prevent simultaneous opening of Ports 1 and 3.

Ordering Information
Customers can select specifications based on pressure range, reset type, seal material, and special requirements. Options include automatic or manual reset and materials like Buna N or Viton.

Maintenance
Model 4047 requires minimal maintenance. Annual inspections are recommended, with monthly checks for proper functioning by simulating unsafe conditions.

Contact Information
AMOT provides contact details for their offices in Europe, Africa, Americas, Asia, and Australasia for customer support and inquiries.
See more

Catalog excerpts

2 or 3-Way Pressure Valve-1

high capacity, law pressure valve for settings psi) rising over several ranges. Applications Include sensing low pressure low pressure gas, water, fuel, oil, or for liquid level sensing and control. By piping to the vacuum port, the valve can be used to sense vacuum pressure from overload on gas engines by sensing the vacuum Typical applications • Sense low pressure or vacuum of water, • Detection of overload on gas engines • Sensing of vacuum Intake air manifold • 3-way valve has balanced force design • Pressure can be applied at any port • Buna N (Mitrile) "tadpole" seals are easily • Bubble-tight seals with center dead spot • Gulfproof finish standard

 Open the catalog to page 1
2 or 3-Way Pressure Valve-2

Low Pressure Valve - Model 4047 Operation 2-WAY Valve to open on rising pressure Port 1 must be plugged. Rising pressure will open Port 2 to Port 3 above the trip point. Valve to open on falling pressure Port 3 must be plugged. Falling pressure will open Port 2 to Port 1 below the set trip point. 3-WAY Valve operation for 3-way action is identical with that for 2-way except that there will be no plugged ports. On valves set to trip on rising pressure, Port 1 will open to Port 2 until just below the trip point. Port 3 will open to Port 2 at the trip point. On falling pressure, Port 3 will close...

 Open the catalog to page 2
2 or 3-Way Pressure Valve-3

Low Pressure Valve - Model 4047 Use the table below to select the unique specification of your 4047 Low Pressure Valve:

 Open the catalog to page 3
2 or 3-Way Pressure Valve-4

Low Pressure Valve - Model 4047 Maintenance Properly applied and installed, Model 4047 requires minimal maintenance. Unless leakage or other problems are noticed sooner, an inspection of the units at yearly intervals is adequate to detect and make provision for normal wear and preventative maintenance. It is recommended that the valve be checked monthly if possible for proper functioning by simulating an unsafe condition. Service kits Service Kit No. 9169X001 - Buna N Service Kit No. 9169X002 - Viton Ref Qty Description Ref Qty Description 8 1 O-ring 8 1 O-ring 10 1 Diaphragm 10 1 Diaphragm 12...

 Open the catalog to page 4
2 or 3-Way Pressure Valve-5

Americas Europe and Africa AMOT USA 8824 Fallbrook Dr Houston TX 77064 USA AMOT Western Way Bury St Edmunds Suffolk, IP33 3SZ England Tel: +1 (281) 940 1800 Fax +1 (713) 559 9419 Email [email protected] Tel +44 (0) 1284 762222 Fax +44 (0) 1284 760256 Email [email protected] Asia and Australasia AMOT Shanghai Rm A308 Building A8 Jiahua Business Center 808 Hongqiao Road Shanghai 200030 China Tel +86 (0) 21 6447 9708 Fax +86 (0) 21 6447 9718 Email [email protected] AMOT Singapore 10 Eunos Road 8 #12-06 Singapore Post Centre Singapore 408600 Tel +65 6408 6265 Fax +65 6293 3307 Email [email protected]...

 Open the catalog to page 5

All AMOT catalogs and technical brochures

  1. Model 8402

    6  Pages

  2. Model 4123C

    5  Pages

  3. Model 4418F

    9  Pages

  4. Model 4420

    7  Pages

  5. Model 2180

    6  Pages

  6. SEDM

    4  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.