Group: Ammann
Catalog excerpts
The machine of this class is ideal for small and medium size job sites where a good manoeuvrability to operate in limited environments is requested. Despite its compact dimensions the machine is able to pave till 4.5 m of width. The machine has three axles: front, two axles for steer- ing and rear, axle for traction. The rear axle is fitted with large pneumatic tyres so that the machine can be driven also on soft grounds. On the front oscillating axles are fitted large full rubber tyres. The steering system with a hydraulic pump gives a smooth control when turning. The hoppers are independently controlled by an electric- hydraulic system. The front pushing rollers move in layers of final wearing course, national and municipal roads large squares sport grounds and courtyards building lots and parking sequence with the hoppers. Two adjustable seats, left/ right, can slide externally. The dashboard is adjustable to the seat position to allow easy operations. Ground controls with anti-vandal guards for the road operator. Hydraulic foldable canopy with rear supports to ensure good visibility. The feeding system of the material is carried out by two independent and reverse chain belt conveyors and augers controlled by paddle microswitches that regulate the flow of material to the screed in order to maintain the most effective distribution of the mate- rial in any condition. The height of the auger group is electric-hydraulically adjustable. Screed options Vibrating screed (FSV) or screed with tamper and vibra- tion (FST) with gas or electric heating, automatic light- ing and temperature control, ISR system (Screed Assist) with pressure adjustment.
Open the catalog to page 1Ammann Development Italy S.R.L. Technical specification Screed Options Automatic heating control Augers height hydraulically adjustable ISR system (Screed Assist) Hydraulic folding canopy Four wheel drive (DT) Longitudinal levelling system Slope control system Proportional ultrasonic augers control Electric-hydraulic camber adjustment March 2010. Sizes, specifications and photos are not binding and can change without any notice. Productivity Partnership for a Lifetime
Open the catalog to page 2All Ammann catalogs and technical brochures
-
eARX_26-2
2 Pages
-
ARX 23.1-2
2 Pages
-
ABP 240–400 HRT
2 Pages
-
PRODUCT RANGE
24 Pages
-
TRENCH ROLLERS
16 Pages
-
Batch Mixing plants
32 Pages
-
QuickBatch
12 Pages
-
ABP UNIVERSAL ABP HRT
24 Pages
-
ABA UniBatch
12 Pages
-
ABC SOLIDBATCH
16 Pages
-
LIGHT COMPACTION
32 Pages
-
large paver class classic
20 Pages
-
SOIL & ASPHALT COMPACTORS
32 Pages
-
STV 2400 E
1 Pages
-
STV 3500 E
1 Pages
-
ACT
12 Pages
-
ACT 140 CONTIQUICK
12 Pages
-
continuous asphalt mixing plants
20 Pages
-
CEL 9 LINEAR STORAGE BIN
4 Pages
-
CONCRETE MIXING SYSTEMS
20 Pages
-
Transport-optimized Plant
8 Pages
-
Universal HRT
16 Pages
-
Prime 100-140
12 Pages
-
Trench Roller
12 Pages
-
Single-drum rollers, 7 to 25
8 Pages
-
ARX Tandem Rollers 1.5 - 4.5 t
12 Pages
-
AP240 pneumatic tyred roller
6 Pages
-
ARP_35_en
6 Pages
-
AV1_en
8 Pages
-
AFT500_en
2 Pages
-
AFW500_en
2 Pages
-
ammann-paver_AFW270
2 Pages
-
ammann-paver_AFW150
2 Pages
Archived catalogs
-
Add-on plate compactor
4 Pages
-
Tandem Rollers 8 - 9 t
8 Pages
-
Compacteur tandem 7-11.5t
8 Pages
-
Trench Rollers
8 Pages
-
Vibratory Double Drum Roller
6 Pages
-
Concrete Mixing Plants
12 Pages
-
Haupttitel Aussen Dem
4 Pages