Vertical twin-shaft mixer Type HM The best mixing quality for dry, moist and viscous materials at variable filling levels in a very gentle process The mixer can be designed to conform to FDA-standards to be used as a sterile mixer and reactor which also meets EHEDG requirements and the 3-A Sanitary Standards. Mixing tools driven and supported only from above OmgaSeal® without dead space Manual feeding hopper on demand Inspection door without dead space designed by Clever-Cut® SinConvex® helical mixing tools provides excellent mixing quality. Choppers to improve the mixing process by deagglomeration Washing nozzles Standard connection flange with outlet flap, seals without dead space Mixing vessel and mixing tools welded and polished without gaps. Mixing chamber: ATEX Zone 20 HM 10.000 Stand-Alone Mixing plant ANIMAL CARE ComDisc® for complete discharge: During the final phase of the discharging, they sweep the ground. Thus, the last remnants are discharged without segregation.

✓ This precision mixer is universally applicable. ✓ The mixing quality can not be exceeded. ✓ The energy input and the mixing time are minimal. ✓ Mixing tool driven and supported only from above. Everything is fully welded and polished without gaps. ✓ The inspection door is especially hygienic - manufactured according to the Clever-Cut® process with OmgaSeal® and seals permanently free of dead space. On request also vacuum-tight or against overpressure. ✓ Automatic wet cleaning devices are available on request. amixon® places special importance on the pilot phase in the test centre. Your mixing...