Gyraton® mixer type GM
2Pages

Gyraton® mixer type GM Function: The helical mixing tool rotates clockwise and conveys the mixed materials upward. At the same time, the mixing tool is directed orbitally along the cylinder wall and collects all volume parts without dead space. Usability: Mixing of all types of dry, moist or suspended bulk materials that are free-flowing. Optionally, liquid additions can also be incorporated. The sizes are freely selectable from 10 m³ to about 70m³. Good mixing results are already achieved at 10% filling level. Mixing is particularly gentle with low energy input. Achievable mixing qualities: sufficient homogenization Filling, discharging: Feeding takes place from above through one or more standard nozzles. The mixed goods are discharged at the bottom through a standard flange with the bottom flap open. The discharge can also take place simultaneously through two, three or more discharge nozzles in order to fill several big bags or containers at the same time, for example. Special features: • Particularly hygienic, mixing tool only mounted and driven on top • Space-saving, compact • Safe and fast discharge • Easy to walk in or clean by means of large inspection door: wet (automatic), dry manual by vacuum cleaner • Optionally pressure-tight or vacuum-tight, in any case gas-tight • The mixing process is particularly gentle with minimum energy input. • Depending on the length of the mixing time, which can be specified by the customer, the rotational frequency of the mixing tool and the orbital motion are adjusted. • Energy consumption is correspondingly low. • Optionally, the mixing chamber and the entire mixing tool can be temperature-controlled. The mixing system can be used as a paste bunker or vacuum mixer. OmgaSeal® O-Ring Arched groove Hygienic inspection door, free of dead space, designed by CleverCut®. Gyraton® mixer with 70m3 useful capacity. The mixing chamber can be conveniently walked into. ANIMAL CARE Dispensing can be accelerated if several discharge devices are installed.

Pivot point The discharge valves are installed in the bottom of the mixing chamber. They operate without dead space and allow the mixed goods to be discharged downwards to a high degree. Optionally, big bag filling or pneumatic conveying systems can be installed. Six linear drives form a hexapod. It is mounted on the head plate / frame of the mixer and carries the gear unit, motor and mixing tool. The hexapod is controlled in such a way that the gear unit and mixing tool revolve around the pivot point. The rotation of the mixing tool occurs regardless of the circular motion. The shaft seal...