Container mixer Type COM Ideal mixing quality for dry and moist materials at variable filling levels The container mixer is designed for flexible individual order production. It is particularly suitable if the weighing, mixing and filling steps take place decoupled in separate rooms. While setup and cleaning takes place in one room, production can continue in other areas. Mixing tool driven and supported only from above Mixtainers® serve as a mixing vessel. They are very precisely manufactured. A so-called Washtainer® may be docked for the purpose of automatic wet cleaning and drying. Liquid addition by means of a nozzle focused into the active area of the chopper Chopper for deagglomeration The Sinconvex®-Multiplane® spiral blade initiates a three dimensional flow of the mixing goods; creating a helical upward movement on the periphery and downward flow in the center. The machine provides very good mixing results; on request also very gentle. SinConvex®-Multiplane® mixing tool Mixtainers® can be equipped with a lid and handling device on request. Mixing Chamber: ATEX Zone 20 ANIMAL CARE

User Benefits ✓✓ The mixer guarantees ideal mixing qualities. amixon® places special importance on the pilot phase in the test centre. Your mixing processes are simulated here. This way, we support you in your product development phase. amixon® has a main test center in Paderborn (Germany). Further test centers are situated in Japan, Thailand, India, South Korea and the USA. ✓✓ The container functions as the mixing room; it is used for component dosing, for mixing and as a pre-device for the filling machine / for the extruder / for liquid preparation. ✓✓ Very well suitable for fully automatic...