Conical mixer dryer, reactor Type AMT Hot/cold - pressure/vacuum reactions for dry, moist and pasty goods. The mixer dryer, reactor is suitable for powders, suspensions, pastes and dough (testing is recommended). The drying process is carried out extremely carefully. Complete discharge is possible if goods are flowable. The dryer/reactor can be designed to conform with FDA-standards, to be used as a sterile reactor. In this case, it also meets EHEDG requirements and the 3-A Sanitary Standards. Vapour filter heatable,equipped with Clever-Cut®-designed inspection door on demand The mixing tool is mounted and driven only on top. Gear box equipped with a cooling device The reactor is vacuum and pressure tight and heatable by steam, thermal oil or water. On request also insulated. Manhole heatable, can be located on the top or on the side. SinConvex® mixing tool: fully temperature controlled on demand, excellent mixing quality, high degree of discharging Mixing chamber and mixing tool are fully welded and polished. Choppers can improve the drying process by deagglomeration (mechanically sealed). Mixing chamber: ATEX Zone 20 Segment ball valve without dead space, vacuum and pressure resistant Headplate lifts automatically Mixing tool heated ANIMAL CARE Vapor filter on the headplate

User Benefits ✓✓ Particularly fast and gentle drying at low temperatures and low rotational frequencies if, for example, fungal spores, bacterial cultures or effect pigments should be dried. ✓✓ It is also possible to mix intensively deagglomerating in the same apparatus, at higher peripheral speeds and with several HighShearBlades. ✓✓ The mixer is optionally accessible from the side or from above, it can be cleaned fast, safely and convenient; manually or automatically. On request, it can also be sterilized with steam. ✓✓ The mixing tool is fully heated. It is mounted and driven only from above....