pilot valve 15 mm
pilot valve 15 mm
The 15 mm pilot valve by Amisco is an advanced evolution of traditional pneumatic market products. It is designed for applications requiring high performance in pressure and flow, compact size, low power consumption, and high reliability at high cycling rates. The valve is primarily for use with air, and its components are non-detachable.
Key Features
- Heat-resistant bobbin made from 30% glass-filled polyester (PBT).
- Copper wire class H 200°C as per IEC 60317-13.
- Encapsulation with glass-filled polyamide (PA66).
- Stainless steel guiding tube, plunger, and core.
- Designed for over 50 million cycles.
- Equipped with NBR seals and monostable manual override.
- UL-listed components and ATEX conformity for electrical apparatus.
Technical Specifications
- Valve Function: 3/2 NC, 3/2 NO, 2/2 NC, 2/2 NO, 3/2 UNI.
- Media: Air, dried or lubricated.
- Orifice Size: 0.8 to 1.5 mm.
- Pressure: 0 to 10 bar.
- Response Time: 5-15 ms.
- Max Cycling Time: 2000 cpm.
- Life Expectancy: 50-100 million cycles.
- Duty Cycle: ED 100%.
- Temperature: Ambient -10°C to +50°C, Fluid -10°C to +30°C.
- Power: 1 to 2.5 W (DC), 3 VA (AC).
- Voltages: 12-24V DC, 24-115-230V AC.
- Insulation Class: F.
- Protection: IP 65 with connector, IP 67 with flying leads and M12 version.
- Mounting: Any position with M3x18 screws.
Configuration Options
- Electrical Connections: AMP 2.8x0.5, DIN C, Flying Leads, M12.
- Valve Types: Various configurations based on orifice size and function.
- Manual Override: Monostable, bistable, or no override.
- Seal Materials: NBR, FKM, FKM Low Temperature.
Additional Information
For further details on ATEX versions and other specifications, refer to the "ATEX Products" catalogue. Custom configurations and additional technical specifications are available upon request.
Catalog excerpts
Pilot Valve The 15 mm pilot valve has been designed and developped by Amisco as a logical evolution of the traditional product range manufactured for the pneumatic market. The 15 mm solenoid valve is designed for those applications, more and more common on the actual market, where besides high performances in terms of pressure and flow, minimum dimension, very low power consumption and high reliability even at high cycling rates are specified. This system is designed for use with air. The solenoid valve is composed by an encapsulated coil joined to a plastic valve body made by PPS. The assembly...
Open the catalog to page 2
STANDARD TECHNICAL DATA Valve function Orifice size Response time Life time expectancy Duty cycle Voltage variation Insulation class IP 65 (according to EN 60529) with connector assembled with suitable seal (other voltages on request) IP 67 flying leads and M12 version Electrical connection Coil construction Manual override monostable - bistable - no override glass reinforced Polyamide 6.6 valve body stainless steel stainless steel All given information are subjected to changes without notice.
Open the catalog to page 3
TECHNICAL SPECIFICATIONS Valve Function Types Orifice Orifice mm mm (Port 1) (Port 3) Flow rate NL/min (Port 1— >2) 6 bar Δp 1 bar Other specification upon customer request. Valves with external seal Valves with recessed seal Aluminium plate + Seal Alternative possibilities for CUSTOMER LOGO Alternative possibilities for CUSTOMER LOGO Seal (Included)
Open the catalog to page 5
Flying Leads
Open the catalog to page 6
PRODUCT FAMILY 15=15mm pilot valve ELECTRICAL CONNECTION S1 = Industrial 9.4mm 3 pins D1 = DIN C 8.0mm 3 pins C1 = Std Flying Leads (105°C) C2 = HT Flying Leads (140°C) M1 = M12 WINDING CONFIGURATION Other voltages available on demand Other winding configurations available on demand ASSEMBLING COIL-VALVE 1 = pneumatic and electrical ports on the opposite side (external seal) 2 = pneumatic and electrical ports on the same side (external seal) 4 = pneumatic and electrical ports on the opposite side (recessed seal) 5 = pneumatic and electrical ports on the same side (recessed seal) VALVE TYPES (see...
Open the catalog to page 7
AMISCO S.p.A. Via Piaggio, 70 20037 Paderno Dugnano (Mi) Italy Tel. +39 02.99.00.181 Fax +39 02.99.00.18.60 [email protected]
Open the catalog to page 8All AMISCO catalogs and technical brochures
EVI 9S8 Pages
Pneumatic pilot valve12 Pages
Connector8 Pages
pilot valve 10 mm8 Pages
Archived catalogs
EVI7 S98 Pages
EVI7 S106 Pages
EVI9 S6 Pages
3009M Exm2 Pages
EVI5 S136 Pages
15 mm pilite valve8 Pages
22 mm pilot valve6 Pages
AVI312 Pages
EVI510 Pages
EVI7 S86 Pages