pilot valve 10 mm

Product catalog summary

Overview: The document provides detailed specifications and technical data for the 10 mm pilot valve developed by Amisco, designed for pneumatic automation applications requiring high performance, low power consumption, and compact size.

Specifications:

The valve features a heat-resistant bobbin made from 30% glass-filled polyethylene terephthalate (PET) and uses class H 180°C copper wire as per IEC 60317-51 standards.
Encapsulation is done with high-quality glass-filled polypropylene homopolymer.
The plunger and core are made from magnetic stainless steel, optimized for solenoid applications.
It is equipped with HNBR seals and a monostable manual override.
The coil is compliant with EN 60204.1 and VDE 0580 standards, suitable for industrial environments, and conforms to 94/9/EC ATEX for electrical apparatus of group II, category 3.
Designed for low voltage DC applications, all components are UL-listed.

Technical Data:

Valve Function: 3/2 Normally Closed (NC)
Media: Air (lubrication not necessary)
Orifice Size: 0.8 mm
Pressure Range: 0 to 8 bar
Flow Rate: 13 NL/min at 6 bar and Δp = 1 bar
Response Time: 10 ms
Max Cycling Time: 2400 cycles per minute
Life Expectancy: 50 million cycles
Mounting: In any position with two screws M 1.6 x 14, Tmax = 0.5Nm

Materials:

Valve Body: Polybutylene terephthalate (PBT)
Seals: HNBR (other materials available on request)
Cores and Springs: Stainless steel
Coil: PET with class H 180°C copper wire

Coil Technical Data:

Duty Cycle: ED 100%
Temperature Range: Ambient and fluid -5°C to +50°C
Power: 1W
Voltage: 12-24V DC (other voltages available on request)
Voltage Variation: ± 10%
Insulation Class: F
Degrees of Protection: IP 40 (according to EN 60529)
Electrical Connection: Connector according to EN 60204.1 and VDE 0580

Design and Assembly:

The valve is designed for use with air and is composed of an encapsulated coil joined to a plastic valve body made of PBT, forming a non-detachable assembly.
It supports subbases or battery assembly for common pressure and exhaust locations.

Marking and Customization:

Options for customer logos and markings are available.
Product coding includes specifications for valve type, seal materials, manual override, nominal voltage, winding configuration, and electrical connection.

Catalog excerpts

Pilot Valve The 10 mm pilot valve has been designed and developped by Amisco as a further evolution of the traditional product range manufactured for the pneumatic automation market. The 10mm solenoid valve is designed for those applications, where high performances in terms of pressure and flow are specified, together with very low power consumption and miniaturized dimension. High reliability even at high cycling rates is granted in any case. This system is designed for use with air. The solenoid valve is composed by an encapsulated coil joined to a plastic valve body made by PBT. The assembly...

Open the catalog to page 2

TECHNICAL DATA Pilot Valve technical data Valve function Orifice size Response time Life time expectancy Manual override Coil technical data Duty Cycle 12-24V DC (other voltages on request) Voltage variation Insulation Class Electrical connection Coil construction Materials Valve body HNBR (other materials on request) stainless steel stainless steel copper wire All given information are subjected to changes without notice. 2

Open the catalog to page 3

axial connection PORT 1 PORT 3 PORT 2

Open the catalog to page 4

perpendicular connection PORT 1 PORT 3 PORT 2

Open the catalog to page 5

CUSTOMER LOGO VALVE BODY

Open the catalog to page 6

PRODUCT FAMILY 10 = 10 mm pilot valve ELECTRICAL CONNECTION P1 = Perpendicular with connector P2 = Perpendicular without connector A1 = Axial with connector A2 = Axial without connector NOMINAL VOLTAGE C1 = 12VDC C2 = 24VDC Other voltages available on demande WINDING CONFIGURATION B = 1.0 W Other winding configurations available on demande ASSEMBLING COIL-VALVE 1 = pneumatic and electrical ports on the opposite side VALVE TYPES B = 3/2 NC Ø 0.8/1 mm SEAL MATERIALS H = HNBR MANUAL OVERRIDE M = monostable (no lock) brass ASSEMBLING EQUIPMENTS - to be ordered separately electrical connector MARKING...

Open the catalog to page 7