*mydirectindustry

EVI 9S

Product catalog summary

Overview: The EVI 9S system by AMISCO is a series of solenoid operators designed for pneumatic valves, featuring an 8 mm guide tube and a 7 mm plunger, primarily for use with air. For other media, contact AMISCO.

Coil Specifications: The coil is available with various electrical terminations and is constructed with heat-resistant materials, including a glass-filled thermoplastic polyester bobbin and a magnetic yoke made of low carbon iron. It is encapsulated in glass-filled nylon and rated to class F and IP65/IP67 standards. The coil complies with EN 60204.1 and VDE 0580 standards.

Complete Solenoid Operator: The coil is attached to the plunger guide tube with a knurled nut, allowing easy changes without disrupting the pneumatic circuit. The guide tube can be mounted using a thread or flange, with specific interface dimensions recommended to maintain performance.

Operator Details: The plunger and core are made from magnetic stainless steel, with the guide tube typically in brass. NBR rubber seals are standard, with FKM available on request. The armature assembly is designed for over 50 million cycles.

Technical Specifications: The system supports 2/2 and 3/2 way normally closed and open valves. Voltage tolerance is ±10%, with a temperature range of –10°C to +50°C and a 100% duty cycle. Standard voltages include 24-110-230 VAC and 12-24 VDC.

Coil and Operator Coding: The document provides detailed coding specifications for coils and operators, including electrical connections, nominal voltage, and supply current types.

Contact Information: AMISCO S.p.a., Via Piaggio, 70, 20037 Paderno Dugnano (Mi), Italy. Tel: +39 02.99.00.181, Fax: +39 02.99.00.18.60, Email: [email protected], Website: www.amisco.it

Catalog excerpts

Solenoid System COIL The EVI 9S system by AMISCO includes a wide range of solenoid operators designed for pneumatic valves. All solenoids of this system have the guide tube with a diameter of 8 mm and the plunger with a diameter of 7 mm. The system is designed for use with air. KNURLED NUT ORing 9x1,5 TOP CORE KNURLED NUT ORing 9x1,5 TOP CORE GUIDE TUBE GUIDE TUBE MOUNTING PLATE THREAD M12 X 0,5 FLANGE MOUNTING VERSION THREAD VERSION Please contact Amisco for use with other media. All given information are subjected to changes without notice. COIL The coil is available with different electrical...

Open the catalog to page 2

SOLENOID SYSTEMS and normally open valves Electrical termination Flying leads Coil temperature rise °C Copper temperature rise °C 3/2 way NO Flange Unlet from the topi 07L... Inlet orifice 0 mm 1.2 1.2 1.2 3/2 way NO Thread unlet from the topi 07F... Working pressure bar 0-1 0 0-1 0 0-1 0 Duty cycle: 100% Other voltages on request For different orifice sizes and pressures contact AMISCO.

Open the catalog to page 3

TYPE 09= EVI 9 COIL BORING 08 = 8 mm ELECTRICAL CONNECTION S = AMP 2,8x0,5 D = DIN 43650 C C = Flying leads SUPPLY CURRENT A = Alternating current (A.C.) D = Direct current (D.C.) R = Rectified alternating current NOMINAL VOLTAGE Example: 024 = 24V 220 = 220 V CUSTOMER LOGO Winding Code 01 01 02 02 01 MARKING ZN = Standard - no logo AM = Standard + Amisco logo ... = customized coil

Open the catalog to page 5

EXAMPLES OF MAIN APPLICATIONS

Open the catalog to page 6

TYPE 07L = Flange 07F = Thread DRAWING NUMBER 07 L 3/2 NC = 05480 07 F 3/2 NC = 06260 SUPPLY CURRENT A = Alternating current D = Direct current FUNCTION 2 = 2/2 way 3 = 3/2 way FUNCTION C = Normally closed O = Normally open SEALS E = EPDM N = NBR V = FKM FASTENING SYSTEM N = Without fastening system. Fastening nuts to be ordered separately as below. FASTENING NUTS (Note: tightening torque max 0.6 Nm) Aluminium knurled nut

Open the catalog to page 7