TEQUATIC™ F75 Skids EN
4Pages

TEQUATIC™ PLUS F-75 Filter, C-Series Skid | Product Data Sheet Designed for Nasty Water The TEQUATIC™ PLUS F-75 Filter, with its innovative and patented design, combines the power of continuously cleaning, cross-flow filtration with forced settling and solids collection into a single device. The fouling resistant filter element delivers a consistent level of solids removal down to 10 micron1 while processing a wide range of extremely nasty, highly loaded, difficult-to-treat water. The unique cross-flow action, combined with an engineered, laser-cut filter element, delivers the highest possible flow and maximum solids separation without constant plugging or forming a filter cake layer. See operational details on page 3. Industries Served The TEQUATIC™ PLUS F-75 Filter is an outstanding choice for removing difficult solids in a variety of commercial and industrial wastewater treatment and reuse markets, such as: • Oil and gas, including refinery water • Agriculture, rinse and wash water • Cooling towers • Food and beverage (e.g. meat processing, brewery, and dairy) • Livestock production • Municipal wastewater treatment and reuse Other key advantages include: • Operates consistently and reliably where other filters fail, on fluid streams containing some or all of the following: - High TSS: 100-10,000+mg/L - Fats, oils, and grease (FOG) - Long or short fibers - Hair, lint, and algae • Simple, self-cleaning, automatic operation • Compact footprint (e.g. less space, waste, chemicals, air) • Operationally efficient: • Low maintenance and high uptime -no backwashing or excessive filter changes • High water recovery up to 99% • Energy efficient (0.25-2 psi pressure drop across the filter) • Plastics recycling The C-Series Skid: Proven, Fast, Easy The TEQUATIC™ PLUS F-75 Filter C-Series Skid is built and tested with your needs in mind. Key benefits include: Application Examples • TSS and particulate BOD, COD and TOC* reduction to eliminate or reduce fines and/or surcharges • Pretreatment or cost-saving alternative to clarification, DAF* and aeration • Pretreatment to downstream membranes and filters - Protects MF, UF, RO, and other membranes - Reduces bag and cartridge filter change-outs - Decreases backwash cycles in media filters • TSS reduction in oilfield water applications: - Protects disposal wells - Facilitates reuse of frack flowback wate • It is designed for fast “out of the box” installation and startup, and easy serviceability. • Reliable and proven skid design simplifies and optimizes performance in a compact footprint. • Scalable modular configuration; each skid can connect in parallel to a common feed manifold to meet required flows. • Innovative control system runs, monitors and logs essential parameters. • Touch screen interface allows for customization of timers and set points to any industrial setting. 1. Designed for waste treatment applications with total suspended solids up to 10,000 PPM; 30-80% removal efficiency of 10-17 micron particles, 80-90% of 18-45 micron particles, 95% or greater removal of particles 45 micron and larger. *BOD = biological oxygen demand; COD = chemical oxygen demand; TOC = total organic carbon; DAF = dissolved air flotation; FOG=fats, oil, and grease; UF = ultraf

Standard Features* • Chrome-plated 316L SS filter element • Fiberglass filter housing • Corrosion-resistant internal components are HDPE, PC, SS 316, • Acetal copolymer cleaning assembly • Schedule 80 CPVC, high-temperature piping • Powder-coated carbon steel frame • 5 HP recirculation pump with integrated PLC and VFD • Automated motor-actuated proportional valve for purge with with Viton™ O-rings • Fully integrated CIP system for water with high levels of FOG • Filtrate flow control proportional valve automated for quick selfcontained tuning as process water fluctuates • Valves for...

TEQUATIC™ PLUS F-75 Filter Operation As shown in the illustration to the right, operation of TEQUATIC™ PLUS F-75 Filters is simple yet effective. 1. 1. Pressure-controlled feedwater enters the unit and the water velocity across the filter screen initiates cross-flow filtration. 2. 2. The feedwater flow drives the cleaning brush assembly, activating the cleaning mechanisms within the filter which continuously clean the filter screen, minimizing cake buildup. 3. 3. Solids enter the recirculation and solids collection chamber. Heavy solids remain in the collection chamber while other particles...

Control System Capabilities The control system for the TEQUATIC™ PLUS F-75 Filter C-Series Skid is a PLC-based processor (Siemens S7-1200) which automatically manages and monitors all critical system functionality. The HMI (Siemens TP700) touch screen allows for simple customization of timers and set points to specific needs, and controlled access to set points is operator level and passcode protected. Automatic control, shutdowns and alarms are incorporated. Equipment incudes ethernet communication hardware capabilities to communicate with plant SCADA systems or to set up remote...