Incremental Encoder AMI-ELEKTRONIK GMBH & CO. Produktions KG

AMI incremental angle encoders are constructed and manufactured for multiple applications in close cooperation with each user also for roughest operational demands. AMI encoders are used everywhere there, where direction, paths and angles as well as speed have to be precisely collected and measured. AMI has been manufacturing incremental encoders with up to 18000 pulses for more than 30 years, also including hollow shafts up to 60 mm, electronic measuring hand wheels with mechanical and magnetic lock-ins, which are used in driving-motors, the tool-machinery and robot-industry. Without the engaged...

Functional description Overview Solid shaft encoders Hollow shaft encoders Angle encoders Special encoders Solid shaft Hollow shaft Angle encoders Special encoders Accessories Connectors Couplings Flanges Clamping lugs

Principle of Measuring, Accuracy and Scanning Principle of Measuring AMI encoders with optical scanning are manufactured with incremental graduations which are applied on to glass and/or etched in phosphorous bronze. The information of a position is given by counting each increment, starting from a zero-pulse placed at an optional place, forwarded to the signal-operating electronic component. The zero-pulse is determined by an additionally applied reference-marker. The graduations applied are mainly manufactured in lithographic processes. This process allows very precise and exact sharply edged...

AMI encoders have proved to be important system-components between engineering mechanics and analysis of electronics. They are rough, electrically reliable and operate reliably also under extreme environmental conditions. Fields of applications of AMI encoders are: tool-machinery, robots, mounting-and handling devices, electric drives, motors, elevators as well as measuring- and all kinds of testing devices. Overview solid shaft encoders shaft diameter

Overview hollow shaft encoders hollow shaft diameter Overview angle encoders shaft diameter

Overview special encoders shaft diameter cone shaft claw coupling A multiplicity of compatible devices for competition and special devices for any appropriate purpose/application are at your disposal. All devices listed in this brochure give only a small survey of our devices manufactured. In case you are in need of a device which is not listed in this brochure, no problem: Take the opportunity and use our application advisory service via telephone or telefax and e-mail [email protected] – we are at your disposal any time. It is of great interest to us and we are gladly prepared to propose...

Solid shaft AMI 100 / 110 AMI 200 AMI 300 AMI 401 / 402 AMI 410 / 411 AMI 412 / 423 Hollow shaft AMI 501 / 502 AMI 503 AMI 512 AMI 513 AMI 534 Angle encoder AMI 1310 AMI 1503 AMI 1513 AMI 1526 AMI 1529 Special encoder Handwheel PRO 100 PRO 200 PRO 512 AMI 449 AMI 487 AMI 492 AMI 515 Accessories Connectors Couplings Flanges Clamping lugs Pulses Each pulse possible Interpolation up to 10.000 internal 2 ... 50 times interpolation optional Mechanical Data Shaft Shaft load Rotating speed Working temperature Vibration Shock Ingress protection 89/366/EWG EMV-rules Ø 6 ... 10 mm, stainless steel axial...

Pulses Each pulse possible Interpolation Mechanical Data Shaft Shaft load Rotating speed Working temperature Vibration Shock Ingress protection 89/366/EWG EMV-rules Electrical Data Signals Light source Operating voltage Current consumption Output frequency Output level Current output Output signals up to 10.000 internal 2 ... 50 times interpolation optional Ø 10 mm, stainless steel axial 10 N, radial 20 N max. 10.000 rpm 0° C ... +80° C 10 g (20 ... 2.000 Hz) 100 g (11 ms) IP 64 on shaft (optional IP 67) EN 50081 part 2, EN 50082 part 2 square wave and sinusodial LED 5 Volt ± 5 %, 10 ... 30 Volt,...

Solid shaft AMI 100 / 110 AMI 200 AMI 300 AMI 401 / 402 AMI 410 / 411 AMI 412 / 423 Hollow shaft AMI 501 / 502 AMI 503 AMI 512 AMI 513 AMI 534 Angle encoder AMI 1310 AMI 1503 AMI 1513 AMI 1526 AMI 1529 Pulses Two seperate outputs with different pulses Standard: Output 1 up to max. 10.000 ppr Output 2 up to max. 6.500 ppr Mechanical Data Shaft Shaft load Rotating speed Working temperature Vibration Shock Ingress protection 89/366/EWG EMV-rules Ø 6 ... 10 mm, stainless steel axial 10 N, radial 20 N max. 10.000 rpm 0° C ... +80° C 10 g (20 ... 2.000 Hz) 100 g (11 ms) IP 64 on shaft (optional IP...

Pulses Each pulse possible Mechanical Data Shaft Shaft load Rotating speed Working temperature Vibration Shock Ingress protection 89/366/EWG EMV-rules Ø 3 ... 6 mm, stainless steel axial 10 N, radial 20 N max. 10.000 rpm 0° C ... +80° C 10 g (20 ... 2.000 Hz) 100 g (11 ms) IP 64 on shaft EN 50081 part 2, EN 50082 part 2 Electrical Data Signals Light source Operating voltage Current consumption Output frequency Output level Current output Output signals square wave LED 5 Volt ± 5 %, 10 ... 30 Volt, 5 ... 30 Volt max.. 100 mA without load 300 kHz with square wave 5 Volt 300 kHz with square wave...

Solid shaft AMI 100 / 110 AMI 200 AMI 300 AMI 401 / 402 AMI 410 / 411 AMI 412 / 423 Hollow shaft AMI 501 / 502 AMI 503 AMI 512 AMI 513 AMI 534 Angle encoder AMI 1310 AMI 1503 AMI 1513 AMI 1526 AMI 1529 Special encoder Handwheel PRO 100 PRO 200 PRO 512 AMI 449 AMI 487 AMI 492 AMI 515 Accessories Connectors Couplings Flanges Clamping lugs Pulses Each pulse possible Interpolation up to 10.000 internal 2 ... 50 times interpolation optinal Mechanical Data Shaft Shaft load Rotating speed Working temperature Vibration Shock Ingress protection 89/366/EWG EMV-rules Ø 9,52 and 10 mm, stainless steel axial...

Pulses Each pulse possible Mechanical Data Shaft Shaft load Rotating speed Working temperature Vibration Shock Ingress protection 89/366/EWG EMV-rules Ø 4 ... 6 mm, stainless steel axial 10 N, radial 20 N max. 10.000 rpm 0° C ... +80° C 10 g (20 ... 2.000 Hz) 100 g (11 ms) IP 64 on shaft EN 50081 part 2, EN 50082 part 2 Electrical Data Signals Light source Operating voltage Current consumption Output frequency Output level Current output Output signals square wave and sinusodial LED 5 Volt ± 5 %, 10 ... 30 Volt, 5 ... 30 Volt max. 100 mA without load 300 kHz with square wave 5 Volt 160 kHz with...