Specifications:
- Pulses: Up to 10,000 pulses possible with internal interpolation options ranging from 2 to 50 times.
- Mechanical Data: Features a hollow shaft with diameters ranging from 6 to 14 mm made of stainless steel. The shaft can handle axial loads up to 10 N and radial loads up to 20 N. Maximum rotating speed is 10,000 rpm. Operating temperature ranges from 0°C to +80°C. Vibration resistance is 10 g (20 to 2,000 Hz) and shock resistance is 100 g (11 ms). Ingress protection is rated at IP 64 on the shaft.
- Compliance: Conforms to 2014/30/EU EMV-rules, DIN EN 61000-6-2, and DIN EN 61000-6-3 standards.

Electrical Data:
- Signals: Outputs square wave and sinusoidal signals using an LED light source.
- Operating Voltage: Options include 5 Volt ± 5%, 10 to 30 Volt, and 5 to 30 Volt.
- Current Consumption: Maximum of 100 mA without load.
- Output Frequency: 300 kHz with square wave at 5 Volt and 10 to 30 Volt, and 1 MHz with interpolation.
- Output Level: 5 Volt Line-Driver and 10 to 30 Volt push-pull short-circuit proof.
- Current Output: 20 mA.
- Output Signals: Two channels A and B are phase-shifted by 90° electrically, with a zero-pulse of 1 pulse per revolution. Pulse length options are 90°, 180°, or 360° electrically, with all signals available with inversion.

Contact Information:
AMI Elektronik GmbH & Co. Produktions KG, Benzstr. 30, 82178 Puchheim, Germany. Tel: +49 (0) 89 800617-0, Email: [email protected], Website: www.ami-elektronik.de

Note: Specifications are subject to modifications.