Specifications:
Type AMI 501 and 502 are pulse encoders with different pulse capabilities. The AMI 501 supports up to 2,000 pulses, while the AMI 502 supports up to 2,500 pulses.

Mechanical Data:
- Hollow Shaft: Diameter ranges from 3 to 6 mm, made of stainless steel.
- Shaft Load: Axial load capacity is 10 N, and radial load capacity is 20 N.
- Rotating Speed: Maximum speed is 10,000 rpm.
- Working Temperature: Operates between 0° C and +80° C.
- Vibration Resistance: 10 g within 20 to 2,000 Hz.
- Shock Resistance: 100 g for 11 ms.
- Ingress Protection: Rated IP 64 on the shaft.

Compliance:
Conforms to 2014/30/EU EMV-rules, DIN EN 61000-6-2, and DIN EN 61000-6-3 standards.

Electrical Data:
- Signals: Square wave signals with LED light source.
- Operating Voltage: Options include 5 Volt ± 5 %, 10 to 30 Volt, and 5 to 30 Volt.
- Current Consumption: Maximum of 100 mA without load.
- Output Frequency: 300 kHz with square wave for both 5 Volt and 10 to 30 Volt.
- Output Level: 5 Volt Line-Driver and 10 to 30 Volt push-pull, short-circuit proof.
- Current Output: 20 mA.
- Output Signals: Two channels, A and B, phase-shifted by 90° electrically, with a zero-pulse of 1 pulse per revolution. Signal lengths can be 90°, 180°, or 360° electrically, with all signals having inversion capability.

Manufacturer Information:
AMI Elektronik GmbH & Co. Produktions KG, located at Benzstr. 30, 82178 Puchheim, Germany. Contact via phone at +49 (0) 89 800617-0 or email at [email protected]. More information available at www.ami-elektronik.de.

Note: Specifications are subject to modifications.