- Catalogs
- AMI Elektronik
- AMI 410/411
AMI 410/411
AMI 410/411
- Pulses: Up to 10,000 pulses possible with internal interpolation ranging from 2 to 50 times, optional.
- Mechanical Data:
- Shaft: Diameter of 9.52 and 10 mm, made of stainless steel.
- Shaft Load: Axial load of 10 N, radial load of 20 N.
- Rotating Speed: Maximum of 10,000 rpm.
- Working Temperature: 0°C to +80°C.
- Vibration: 10 g (20 to 2,000 Hz).
- Shock: 100 g (11 ms).
- Ingress Protection: IP 64 on shaft.
- Standards: Complies with 2014/30/EU EMV-rules, DIN EN 61000-6-2, and DIN EN 61000-6-3.
- Electrical Data:
- Signals: Square wave and sinusoidal.
- Light Source: LED.
- Operating Voltage: 5 Volt ± 5%, 10 to 30 Volt, 5 to 30 Volt.
- Current Consumption: 60 to 100 mA without load.
- Output Frequency: 300 kHz with square wave 5 Volt, 300 kHz with square wave 10 to 30 Volt, 1 MHz with interpolation.
- Output Level: 5 Volt Line-Driver, 10 to 30 Volt push-pull short-circuit proof.
- Current Output: 20 mA.
- Output Signals: 2 channels A and B phase-shifted 90° electrically, zero-pulse 1 pulse per revolution, length 90°, 180°, or 360° electrically, all signals with inversion.
- Type: AMI 410 / 411.
- Manufacturer: AMI-ELEKTRONIK, AMI Elektronik GmbH & Co. Produktions KG.
- Contact: Benzstr. 30, 82178 Puchheim, Tel. +49 (0) 89 800617-0, [email protected], www.ami-elektronik.de.
- Note: Subject to modifications.
Catalog excerpts
Pulses Each pulse possible Interpolation up to 10.000 internal 2 ... 50 times interpolation optinal Mechanical Data Shaft Shaft load Rotating speed Working temperature Vibration Shock Ingress protection 2014/30/EU EMV-rules 0 9,52 and 10 mm, stainless steel axial 10 N, radial 20 N max. 10.000 rpm 0° C ... +80° C 10 g (20 ... 2.000 Hz) 100 g (11 ms) IP 64 on shaft DIN EN 61000-6-2, DIN EN 61000-6-3 Electrical Data Signals Light source Operating voltage Current consumption Output frequency Output level Current output Output signals square wave and sinusodial LED 5 Volt ± 5 %, 10 ... 30 Volt, 5 ... 30 Volt 60 ... 100 mA without load 300 kHz with square wave 5 Volt 300 kHz with square wave 10 ... 30 Volt 1 MHz with interpolation 5 Volt Line-Driver 10 ... 30 Volt push-pull short-circuit proof 20 mA 2 channels A and B phase-shifted 90° electrically zero-pulse 1 pulse per revolution length 90°, 180° or 360° electrically all signals with inversion Anderungen vorbehalten/subject to modifications AMI Elektronik GmbH & Co. Produktions KG Benzstr. 30 82178 Puchheim Tel. +49 (0) 89 800617-0 [email protected] www.ami-elektronik.de
Open the catalog to page 1All AMI Elektronik catalogs and technical brochures
Clamps1 Page
Flanges1 Page
Handwheel1 Page
Spannpratzen1 Page
Flansche1 Page
Connector1 Page
AMI 4921 Page
AMI 4871 Page
AMI 4491 Page
Handrad1 Page
AMI 15261 Page
AMI 15131 Page
AMI 15031 Page
AMI 13101 Page
AMI 5131 Page
AMI 5121 Page
AMI 5031 Page
AMI 501/5021 Page
AMI 412/4231 Page
AMI 401/4021 Page
AMI 3001 Page
AMI 2001 Page
AMI 100/1101 Page
AMI Catalogue36 Pages
- Connector
- Data connector
- Angular encoder
- Circular connector
- Polymer connector
- Incremental encoder
- Socket electrical connector
- Incremental rotary encoder
- Male connector
- Shaft shaft coupling
- Solid-shaft rotary encoder
- Optical rotary encoder
- Hollow-shaft rotary encoder
- Industrial rotary encoder
- Flange coupling
- Plug-in connector
- IP67 rotary encoder
- Compact rotary encoder
- Aluminum rotary encoder
- Stainless steel rotary encoder