- Catalogs
- AMI Elektronik
- AMI 300
AMI 300
AMI 300
- Shaft: Diameter ranges from 6 to 10 mm, made of stainless steel.
- Shaft Load: Axial load capacity is 10 N, and radial load capacity is 20 N.
- Rotating Speed: Maximum speed is 10,000 rpm.
- Working Temperature: Operates between 0°C and +80°C.
- Vibration: Can withstand 10 g within the frequency range of 20 to 2,000 Hz.
- Shock: Can endure shocks up to 100 g for 11 ms.
- Ingress Protection: IP 64 on shaft, with an optional upgrade to IP 67.
- Compliance: Adheres to 2014/30/EU EMV-rules, DIN EN 61000-6-2, and DIN EN 61000-6-3 standards.
- Signals: Square wave signals are used.
- Light Source: LED.
- Operating Voltage: 5 Volt ± 5%, and 10 to 30 Volt.
- Current Consumption: Maximum of 120 mA per system without load.
- Output Frequency: 300 kHz with square wave at 5 Volt, and 160 kHz with square wave at 10 to 30 Volt.
- Output Level: 5 Volt Line-Driver and 10 to 30 Volt push-pull, short-circuit proof.
- Current Output: 20 mA.
- Output Signals: Two channels, A and B, phase-shifted by 90° electrically, with one zero-pulse per output. Pulse length can be 90°, 180°, or 360° electrically, and all signals come with inversion.
- Model: Type AMI 300.
- Manufacturer: AMI Elektronik GmbH & Co. Produktions KG.
- Contact: Benzstr. 30, 82178 Puchheim, Tel. +49 (0) 89 800617-0, Email: [email protected], Website: www.ami-elektronik.de.
- Note: Subject to modifications.
Catalog excerpts
Pulses Two seperate outputs with different pulses Mechanical Data Shaft Shaft load Rotating speed Working temperature Vibration Shock Ingress protection 2014/30/EU EMV-rules Electrical Data Signals Light source Operating voltage Current consumption Output frequency Output level Current output Output signals Standard: Output 1 up to max. 10.000 ppr Output 2 up to max. 6.500 ppr 0 6 ... 10 mm, stainless steel axial 10 N, radial 20 N max. 10.000 rpm 0° C ... +80° C 10 g (20 ... 2.000 Hz) 100 g (11 ms) IP 64 on shaft (optional IP 67) DIN EN 61000-6-2, DIN EN 61000-6-3 square wave LED 5 Volt ± 5 %, 10 ... 30 Volt max. 120 mA per system without load 300 kHz with square wave 5 Volt 160 kHz with square wave 10 ... 30 Volt 5 Volt Line-Driver 10 ... 30 Volt push-pull short-circuit proof 20 mA 2 channels A and B phase-shifted 90° electrically je 1 zero-pulse pro Output length 90°, 180° or 360° electrically all signals with inversion Anderungen vorbehalten/subject to modifications AMI Elektronik GmbH & Co. Produktions KG Benzstr. 30 82178 Puchheim Tel. +49 (0) 89 800617-0 [email protected] www.ami-elektronik.de
Open the catalog to page 1All AMI Elektronik catalogs and technical brochures
Clamps1 Page
Flanges1 Page
Handwheel1 Page
Spannpratzen1 Page
Flansche1 Page
Connector1 Page
AMI 4921 Page
AMI 4871 Page
AMI 4491 Page
Handrad1 Page
AMI 15261 Page
AMI 15131 Page
AMI 15031 Page
AMI 13101 Page
AMI 5131 Page
AMI 5121 Page
AMI 5031 Page
AMI 501/5021 Page
AMI 412/4231 Page
AMI 410/4111 Page
AMI 401/4021 Page
AMI 2001 Page
AMI 100/1101 Page
AMI Catalogue36 Pages
- Connector
- Data connector
- Angular encoder
- Circular connector
- Polymer connector
- Incremental encoder
- Socket electrical connector
- Incremental rotary encoder
- Male connector
- Shaft shaft coupling
- Solid-shaft rotary encoder
- Optical rotary encoder
- Hollow-shaft rotary encoder
- Industrial rotary encoder
- Flange coupling
- Plug-in connector
- IP67 rotary encoder
- Compact rotary encoder
- Aluminum rotary encoder
- Stainless steel rotary encoder