- Catalogs
- AMI Elektronik
- AMI 1526
AMI 1526
AMI 1526
- Hollow Shaft: Available in diameters of 20 mm and 22 mm, made from stainless steel.
- Shaft Load: Axial load capacity of 10 N and radial load capacity of 20 N.
- Rotating Speed: Maximum speed of 4,000 revolutions per minute (rpm).
- Working Temperature: Operates within a temperature range of 0°C to +80°C.
- Vibration Resistance: Withstands vibrations of 10 g within the frequency range of 20 to 2,000 Hz.
- Shock Resistance: Can endure shocks up to 100 g for 11 milliseconds.
- Ingress Protection: Rated at IP 64 for protection against dust and water ingress on the shaft.
- Signals: Outputs square wave signals with LED light source.
- Operating Voltage: Compatible with 5 Volt ± 5%, 10 to 30 Volt, and 5 to 30 Volt power supplies.
- Current Consumption: Maximum of 100 mA without load.
- Output Frequency: Up to 300 kHz with square wave signals and 1 MHz with interpolation.
- Output Level: 5 Volt Line-Driver and 10 to 30 Volt push-pull, short-circuit proof.
- Current Output: 20 mA.
- Output Signals: Features two channels, A and B, phase-shifted by 90° electrically, with a zero-pulse of 1 pulse per revolution. Signal lengths can be 90°, 180°, or 360° electrically, with all signals available in inversion.
Catalog excerpts
Pulses Favorite pulses 9.000, 10.000 and 18.000 ppr Interpolation More pulses on request Accuracy up to ±5" depending on pulses internal 2 ... 50 times interpolation optional Mechanical Data Hollow shaft Shaft load Rotating speed Working temperature Vibration Shock Ingress protection 2014/30/EU EMV-rules 0 20 and 22 mm, stainless steel axial 10 N, radial 20 N max. 4.000 rpm 0° C ... +80° C 10 g (20 ... 2.000 Hz) 100 g (11 ms) IP 64 on shaft DIN EN 61000-6-2, DIN EN 61000-6-3 Electrical Data Signals Light source Operating voltage Current consumption Output frequency Output level Current output Output signals square wave LED 5 Volt ± 5 %, 10 ... 30 Volt, 5 ... 30 Volt max. 100 mA without load 300 kHz with square wave 5 Volt 300 kHz with square wave 10 ... 30 Volt 1 MHz with interpolation 5 Volt Line-Driver 10 ... 30 Volt push-pull short-circuit proof 20 mA 2 channels A and B phase-shifted 90° electrically zero-pulse 1 pulse per revolution length 90°, 180° or 360° electrically all signals with inversion Anderungen vorbehalten/subject to modifications AMI Elektronik GmbH & Co. Produktions KG Benzstr. 30 82178 Puchheim Tel. +49 (0) 89 800617-0 [email protected] www.ami-elektronik.de
Open the catalog to page 1All AMI Elektronik catalogs and technical brochures
Clamps1 Page
Flanges1 Page
Handwheel1 Page
Spannpratzen1 Page
Flansche1 Page
Connector1 Page
AMI 4921 Page
AMI 4871 Page
AMI 4491 Page
Handrad1 Page
AMI 15131 Page
AMI 15031 Page
AMI 13101 Page
AMI 5131 Page
AMI 5121 Page
AMI 5031 Page
AMI 501/5021 Page
AMI 412/4231 Page
AMI 410/4111 Page
AMI 401/4021 Page
AMI 3001 Page
AMI 2001 Page
AMI 100/1101 Page
AMI Catalogue36 Pages
- Connector
- Data connector
- Angular encoder
- Circular connector
- Polymer connector
- Incremental encoder
- Socket electrical connector
- Incremental rotary encoder
- Male connector
- Shaft shaft coupling
- Solid-shaft rotary encoder
- Optical rotary encoder
- Hollow-shaft rotary encoder
- Industrial rotary encoder
- Flange coupling
- Plug-in connector
- IP67 rotary encoder
- Compact rotary encoder
- Aluminum rotary encoder
- Stainless steel rotary encoder