Catalogs >
AMF Reece CR, s.r.o. >
S-4000/S-4001

S-4000/S-4001
2Pages

Catalog excerpts

Technical Specifications S-4000 ISBH+I SM Sewing Head Sewing Speed Single Thread Chainstitch Stitch Type Stitch Density Imitation Sleeve Buttonhole Stitch Bite Buttonhole Type Imitation Sleeve Buttonhole 1-8 Number of Buttonholes Distance between Buttonholes Buttonhole Length Maximum Distance from Edge The S-4000/S-4001 ISBH is an electronically controlled chainstitch straight buttonhole machine designed for sewing decorative non-functional buttonholes on jacket sleeves. The machine is based on the well known AMF Reece S-4000 range of machines having all of the features the same. Maximum Distance First to Last Buttonhole Angle Adjustable Maximum Distance from Edge Thread Trimming Pneumatic Core Spun Polyester No. 80, 100, 120 Recommended Thread Tex Size 30, 40, 50, 60 Core Spun Polyester No. 80, 100 AMF Reece Series 750 Size 90/14, 80/12, 70/10 Recommended Needle Clamp Height Maximum Work Thickness Semi - Automatic Control System Table Types Crosswise 230 V 50/60 HZ 1 phase (according to EN 60204-1) Electrical Requirements Air Requirements Dimensions Head and Table Dimensions Packed Weight The chart shows a distance from the edge of the buttonhole in dependence on the clamp turning angle. The given values are relevant to 20 mm buttonhole. Max. Indexer Depth (F) Angle (E) Lenght (D) 0° Accuracy of illustration and description of equipment shown herein apply to products as manufactured at time of publication. World Headquarters Website: www.amfreece.com This project was realized under the financial support from the state budget sources granted by the Ministry of In

Open the catalog to page 1

S-4000/S-4001 ISBH with Indexer Features Electronic Stop and Start Motion extends machine life and improves machine reliability by eliminating the stop motion and clutch mechanisms. High Sewing Speed combined with low noise level is adjustable from 1,500 spm to 3,800 spm. S-4000 ISBH with Indexer is programmable to sew imitation buttonholes at specific distances between each buttonhole. The number of buttonholes and the distance required between them are selected by the operator on the control panel. DC Drive Motor fully enclosed within the head casting eliminates the need for an under the...

Open the catalog to page 2