RX0424 24-CHANNEL IEPE / VOLTAGE INSTRUMENT WITH INTEGRATED TACHOMETER INPUTS FEATURES • 24-Channel IEPE Accelerometer / Voltage Inputs • 24-bit ADC per Channel • 204.8 ksamples/second/channel Sample Rate • Built-in Current Excitation • 2-Channel Synchronized Tachometer • 1 MHz Tachometer Frequency Range • ±25V, ±250 V Tachometer Input Ranges • TEDS Support • BNC Input Connectors • Built in Self-calibration (BIT) • LXI Ethernet Interface • IEEE 1588 Synchronization with Data Time Stamping • Full-featured Embedded Web Interface FIRST TIME

IEPE / VOLTAGE INSTRUMENT WITH INTEGRATED TACHOMETER Overview AMETEK’s family of rugged instrumentation is designed and built to operate in some of the most extreme environmental conditions imaginable, without compromising measurement accuracy or performance. An ideal solution for measuring acceleration forces, such as sensing static and dynamic movement or vibrations, the RX0424 delivers repeatable laboratory grade measurements to the field. Fully integrated IEPE current excitation and tachometer input channels further enhance the instruments utility and functionality. Accuracy Independent 24-bit...

IEPE / VOLTAGE INSTRUMENT WITH INTEGRATED TACHOMETER Digitizer Channels Input Connector Input Coupling Input Type Voltage (psuedo-differential or differential) User Programmable Sample Rate 204.8 kSa/s or 131.072 kSa/s with Decimate by 5 and by 2n Lowest Sample Rate: 2 Hz Spurious Free Dynamic Range -86 dBfs typical, 10 V range, 1 kHz test frequency 40 nV / sqrt (Hz) typical, 100 Hz, 0.1 V Range Aliased Response < -90 dB (typical) 3-Pole Linear Phase Anti-Alias Filter -3.0 dB @ 400 kHz Digital Anti-Aliasing Filter < 1 mV DC coupling, < 5 mV AC coupling 0.37 Hz Typical (Ranges: 0.1 V, 0.2 V, 0.5...

IEPE / VOLTAGE INSTRUMENT WITH INTEGRATED TACHOMETER Digitizer (cont.) Common Mode Rejection Ratio Amplitude Accuracy Amplitude Match Amplitude Flatness Channel-to-Channel Phase Match Phase Linearity ±0.05⁰up to 90 kHz + 0.01 dB (full scale signal) Phase Accuracy (Relative to Tachometer) Over-Voltage Protection IEPE Excitation Current IEPE Compliance IEPE compliance voltage > 21 V Open / Short IEPE Transducer Detection Green / Red LED located on front panel Trigger Modes Level / Edge, External, LXI, software, Timer, Source, RPM Tachometer Inputs Frequency Range Voltage Range Input Type Input...

IEPE / VOLTAGE INSTRUMENT WITH INTEGRATED TACHOMETER IEEE 1588 Clock / Timing Clock Oscillator Accuracy Synchronization Accuracy < ±100 ns of the Master Clock (synchronized) Timestamp Accuracy Master clock down to 50 ns Alarm Trigger Time Accuracy Master clock down to 50 ns Alarm Time to Trigger Delay LAN Event Trigger Time Accuracy Master clock down to 50 ns LAN Event Time to Trigger Delay Future Timestamp Past / Zero Timestamp Hardware Trigger Timing DIO Trigger Delay Health Monitoring Embedded Health Monitoring Internal temperature, Open/Short IEPE Transducer Detection Built-In Self-Test (BIST)...

IEPE / VOLTAGE INSTRUMENT WITH INTEGRATED TACHOMETER Environmental Environmental Rating IP66 Rated Operating Temperature: -20°C to +60°C Storage Temperature: -55°C to +80°C Humidity Internal Pressure Vibration & Shock Resistance to Corrosive Fluids Per RR EIR2553: Fuel, Engine Oil, Hydraulic Fluid EMC EN 61326 Class A, Criteria A, Annex A Physical Onboard Memory Ordering Model Part Number 24-Channel IEPE Instrument with 2-Channel Tachometer 24 VD AC-DC Desktop Power Supply Power cable including MIL-26482 14-15 plug 9250 Brown Deer Road San Diego, CA 92121 +1 850 450 0085 [email protected]...