LR50KPlus 50 kN Universal Materials Testing Machine The LR50KPlus advanced materials testing machine incorporates an extensive range of features making it ideal for performing complex as well as routine testing applications up to 50 kN (11241 lbf) The standard LR50KPlus features a twin column design with a maximum crosshead travel of 855 mm (33.7 in). Extended machine column options (LR50KPlus-E models) for testing high elongation materials are also available. test set-ups. Test parameters are entered using the keypad in a sequential menu driven format. This bench mounted machine is microprocessor controlled and incorporates world proven 32 bit technology for highly accurate load measurement and rapid data acquisition. The LR50KPlus features an integral user interface consisting of a side mounted control console with large, positive action membrane keys, allowing complex tests to be performed at the touch of a button. A back lit 4 line LCD display shows the test and set-up information in a wide choice of user selectable languages and units. The high stiffness frame incorporates a crosshead guidance system to prevent side loading of the sample under test. The crosshead is driven by twin lead screws and a high precision servo motor and DC servo system to achieve a wide range of speeds throughout the full load range. The stand alone system is capable of storing up to 600 test results from a choice of ten programmable For additional flexibility, the LR50KPlus can also be connected to a personal computer with optional Lloyd Instruments NEXYGENPlus material test and control software. NEXYGENPlus software provides almost unlimited testing and results processing capability in a familiar Windows® environment. A series of highly accurate, interchangeable load cells is available for tension, compression and cycling through zero force measurements. Our extensive range of grips and fixtures support virtually any type of test. The system is ideal for use in production, quality control, educational and research environments. Simple to set up, operate and maintain High accuracy load measurement Constant load holding Data sampling rate 8 kHz Load rate control Saves up to 600 test results 10 programmable test set-ups Pre-loading of samples and cycling to load or extension limits • Multi-stage testing with NEXYGENPlus software Extension resolution <0.05 microns Multi-lingual display options Multi-unit display options Flash upgradeable Extended column options for testing high extension materials • Wide selection of load cells, grips, jigs, extensometers, temperature chambers and other accessories Specification Sheet September 2009 SS-MT-6263-0909 © 2009 by AMETEK, Inc. Force Capacity: LR50KPlus (Standard) 50 kN (11241 lbf) LR50KPlus-E (Extended) 50 kN (11241 lbf) Crosshead Speed Range: 0.001 to 508 mm/min (0.00004 to 20 in/min) Speed Accuracy: <0.2% at steady state Maximum Crosshead Travel: LR50KPlus 855 mm (33.7 in) LR50KPlus-E 1355 mm (53.4 in) Width Between Columns: 404 mm (16 in) Minimum Load Resolution: 0.0001 N (lload cell specific.) Load Cell Accuracy: <0.5% Extension Resolution: <0.05 microns Data Sampling Rate: 8 kHz Display: 40 character x 4 line backlit LCD Extensometer Inputs: Digital and Analogue Load Measuring System: EN ISO 7500:2004 Class 0.5 ASTM E4 Software: NEXYGENPlus Data Analysis Software (optional) Supply Voltage: 230Vac ±10%, 50-60 Hz, Fuse T5AH250V 115Vac ±10%, 50-60 Hz, Fuse T10AH250V Weight: LR50KPlus 148 kg (326 lb) LR50KPlus-E 152 kg (335 lb) Operating Temperature: 5° to 35°C (41° to 95°F)

Accessories Item XLC Series Load Cells: 5 N (1.12 lbf) 10 N (2.25 lbf) 20 N (4.5 lbf) 50 N (11.25 lbf) 100 N (22.5 lbf) 250 N (56.25 lbf) 500 N (112.5 lbf) 1000 N (225 lbf) 2500 N (562.50 lbf) 5000 N (1124 lbf) 10 kN (2248 lbf) 20 kN (4496 lbf) 30 kN (6744 lbf) 50 kN (11241 lbf) Application Software: NEXYGENPlus Item Extensometers: We supply contacting and non-contacting extensometers. For further information see our extensometer specification sheets. Temperature Chambers and High Temperature Furnaces: A range of thermal chambers and furnaces are available. For further information see our specification...