Catalogs >
AMETEK Test >
Chuck & Collet Grips

Chuck & Collet Grips
1 / 4Pages

Catalog excerpts

CHUCK & COLLET GRIPS SPECIFICATION SS-MT-6401-0101 January 2001 INTERNET www.ametek.com www.chatillon.com www.lloyd-instruments.co.uk AMETEK , CHATILLON and NEXYGEN are registered trademarks of AMETEK, inc LLOYD INSTRUMENTS is a trademark of AMETEK, inc. Copyright 2000, by AMETEK, inc.

Open the catalog to page 1

TG16: Split Shoulder Profiled Chuck Grips Description Split Shoulder Profiled Chuck Grips for metal dumbbell samples. Two types are available: TG16/B for metric B test specimens for Tecquipment Type W Tensometer and TG16/C for metric C test specimens. Specification Maximum Capacity Minimum Load Cell Eye End Diameter Weight Each Length Each Temperature Limits 20 kN 100 N 15.85 mm 1.0 Kg 38 mm Ambient 4496 lbf 4.5 lbf 0.62 in 0.44 lb 1.5 in Applications Straining a metal dumbbell sample, by tensile force, generally to fracture, and recording the relationship between force and extension to...

Open the catalog to page 2

TG153: Chuck Grips For Cement Samples Description Profiled Chuck Grips for testing pre-formed cement briquettes. Specification Maximum Capacity Minimum Load Cell Eye End Diameter Weight Each Length Each Temperature Limits 10 kN 100 N 15.85mm 1 Kg 80 mm -70°C +300°C 2248 lbf 22.5 lbf 0.62 in 2.20 lb 3.15 in -94°F + 572°F Applications Used to determine the tensile strength of cement mortar by casting and testing briquette samples. Test method is similar to that described in ASTM C190:1985 (Standard test method for tensile strength of hydraulic cement mortars)

Open the catalog to page 3

TG167: Collett Grip for Hollow Tubes & Bars Description Collet Grip with circular sliding wedge action and initial capstan tightening. Size of collets should be specified to match the sample diameter. A series of additional colletts are available as shown below. Specification Maximum Capacity Minimum Load Cell Sample Diameter Eye End Diameter Weight Each Temperature Limits 100 kN 500 N 12 - 45 mm 31.7 mm 5.75 Kg Ambient 22481 lbf 112 lbf 0.5 - 1.8 in 1.25 in 12.7 lb Applications Tensile testing of hollow tubing and solid bars to determine one or more of the following mechanical properties:...

Open the catalog to page 4