Catalogs >
AMETEK Test >
3 Point Bend Jig for Polystyrene

3 Point Bend Jig for Polystyrene
1 / 2Pages

Catalog excerpts

TG 4975 3 Point Bend Jig for Polystyrene to EN 12089:1997 Method B This fixture is designed to perform three point bend tests on polystyrene samples measuring 300 x 150 x 50 mm (11.81 x 5.91 x 1.97 in) in accordance with the standard EN 12089: 1997 (Method B). The jig consists of an extruded aluminium base with a fixed centre of 250 mm (9.84 in). Two circular supports 30 mm (1.18 in) in diameter, are fitted to the base. The sample is placed centrally on the two supports. An upper loading anvil with a 5/8 in eye end is fixed to the machine’s load cell and driven down onto the sample midway between the two supports. Capacity 1 kN (225 lbf) Packaging Base with supports and upper anvil. Applications Used to determine the resistance of the sample to bending stresses. Standards Applicable EN 12089: 1997 (Method B - bending behaviour of test specimens). Thermal Insulating Products for Building Applications - Determination of Bending Behaviour. SPECIFICATION SS-MT-6433-0102 January 2002 INTERNET www.ametek.com www.lloyd-instruments.co.uk AMETEK and CHATILLON are registered trademarks of AMETEK, inc LLOYD INSTRUMENTS, NEXYGEN and ONDIO are trademarks of AMETEK, inc. Copyright 2002, by AMETEK, inc. Specifications Maximum Capacity: Minimum Loadcell: Sample Dimensions: Base Table Dimensions: Span: Anvil Diameter: Eye End Diameter: Temperature Limits: Weight: 1 kN (225 lbf) 50 N (11.24 lbf) 300 x 150 x 50 mm (11.81 x 5.91 x 1.97 in) 340 x 180 mm (13.39 x 7.09 in) 250 mm (9.84 in) 30 mm (1.18 in) 5/8 in Ambient 311 kg (686 lb)

Open the catalog to page 1

This model is specifically designed for use with LLOYD INSTRUMENTS or CHATILLON LRX, LRXPlus and LFPlus materials testing machines. Please contact AMETEK if you wish to use this jig on another model. Should samples of different dimensions need to be tested, AMETEK have a range of alternative 3 point bend fixtures or are able to design fixtures for specific applications. TEST AND CALIBRATION INSTRUMENTS UK Lloyd Instruments Ltd Forum House 12 Barnes Wallis Road Segensworth East, Fareham Hampshire, PO15 5TT UK Tel: +44 (0)1489 486 399 Fax: +44 (0)1489 885 118 America AMETEK TCI Division 8600...

Open the catalog to page 2