Pneumatic Grips
3Pages

Catalog excerpts

PNEUMATIC GRIPS SPECIFICATION SS-MT-6405-0101 January 2001 INTERNET www.ametek.com www.chatillon.com www.lloyd-instruments.co.uk AMETEK , CHATILLON and NEXYGEN are registered trademarks of AMETEK, inc LLOYD INSTRUMENTS is a trademark of AMETEK, inc. Copyright 2000, by AMETEK, inc.

Open the catalog to page 1

TG412/H: 5 kN (1124 lbf) Pneumatic Vice Grips Description Air operated vice grips available in two forms. TG412/H is operated using a hand switch, while TG412F uses a foot pedal. Both are supplied with plain metal faces as standard, but additional jaw faces are available as listed below. Specification Maximum Capacity Minimum Load Cell Standard Jaw Face Maximum Sample Thickness Eye End Diameter Weight Each Length Each Temperature Limits 5kN 100N 30 x 38mm wide 6mm 15.85mm 1.8Kg 175mm 0°C +35°C 1124 lbf 22.5 lbf 1.2 x 1.5 in 0.24 in 0.62 in 3.97 lb 6.89 in 32°F + 95°F Applications General...

Open the catalog to page 2

ORDERING INFORMATION Model Part No. Description TG420/F TG420/H TG420/C1 TG420/C4 TG420/P1 TG420/P4 TG420/R1 TG420/R2 TG420/R4 TG412/F TG412/H TG412/C3 TG412/C4 TG412/P1 TG412/P2 TG412/P3 TG412/P4 TG412/R1 TG412/R2 TG412/R3 TG412/R4 01/1437 01/1452 01/1440 01/1566 01/1438 01/1559 01/1439 01/1521 01/1558 01/2296 01/2295 01/2333 01/2327 01/2330 01/2326 01/2331 01/2329 01/2489 01/2325 01/2332 01/2328 Foot Switch Operated 500N (112 lbf) Pneumatic Vice Grips Hand Switch Operated 500N (112 lbf) Pneumatic Vice Grips Cross Cut Jaw Faces, 25mm x 25mm (1.0 x 1.0 in) Cross Cut Jaw Faces 50mm x 50mm...

Open the catalog to page 3