LTCM100
3Pages

Catalog excerpts

Chatillon® LTCM-100 Series Motorized Force Tester Specification Sheet The CHATILLON® LTCM100 Series is an economical, motorized tester optimized for product floor operation. When combined with a Chatillon DF Series digital force gauge, it provides users with an easy-to-use testing system for tensile, compression, peel and flexural testing applications. The LTCM100 Series features a large working area and 5-inch (130mm) throat ideal for large sample sizes. The base features pre-drilled holes for fitting fixtures and specialized testing jigs. Crosshead travel is controlled from a simple console or using an optional footswitch controller. Crosshead travel extends to 15 inches (380mm). Speed may be set from 0.2 to 20 in/min or 5 to 500 mm/min. A digital display indicates the travel speed during a test. The return speed may be configured to automatically return at maximum speed. Mechanical deflection limits, located on the column face can be used to set travel limit setpoints. The crosshead will stop when either the upper or lower deflection limit is contacted. The LTCM100 Series is supplied with a hook and compression plate and certificate of conformance. Tensile, Compression, Peel & Flexural Testing Compact, Lightweight, Benchtop Design Simple Operation - Console Controls for Speed & Travel - Optional Footswitch Control - Independent Return Speed Mechanical Deflection Limits Digital Load Limits (with Chatillon DF Gauge) Large Working Area 2 Year Warranty Specifications Load Capacity: Crosshead Speed: Return Speed: Speed Accuracy: Travel Distance: Power: Load Measurement: Operating Temperature: Instrument Weight: Shipping Weight: Shown: LTCM100 Series with optional DFS Series force gauge. Quality Assured. Visit us on the worldwide web: www.chatillon.com

Open the catalog to page 1

Features Easy Operation The LTCM-100 console controls are intuitive and easy to use. Users can specify speed in either inches per minute or millimeters per minute. The speed control knob is used to adjust speed from 0.2 to 20.0 in/min or 0.5 to 500 mm/min. Speed accuracy is better than 3%. The Up and Down key is used to control crosshead direction. Independent Return Speed A separate return speed switch can be positioned so that the crosshead returns to zero at maximum speed or at the speed indicated by the display. Adjustable Deflection Limits Deflection limit switches are supplied on the...

Open the catalog to page 2

Ordering Optional Accessories Remote Control Footswitch DF Gauge Interface Cable SPK-LTCM100-EXT Crosshead Travel Extension Arm Standard Accessories Part No. Compression Plate, 2” Diameter Shown: Optional footswitch contoller allows for handsfree operation for improved productivity. Measurement & Calibration technologies Americas AMETEK Measurement & Calibration Technologies 8600 Somerset Drive Largo, Florida 33773 United States of America Tel +1-727-536-7831 Tel +1-800-527-9999 Fax +1-727-539-6882 Email chatillon.fl-lar@ametek.com Visit Us on the Worldwide Web at: www.chatillon.com United...

Open the catalog to page 3