LS100 Series
2Pages

{{requestButtons}}

Catalog excerpts

LS100 Series - 1

LS100 Plus 100 kN Universal Materials Testing Machine The LS100Plus advanced materials testing machine incorporates an extensive range of features making it ideal for performing complex as well as routine testing applications up to 100 kN (22481 lbf) The standard LS100Plus features a twin column design with a maximum crosshead travel of 824 mm (32.4 in). Extended machine column options (LS100Plus-E models) for testing high elongation materials are also available. This bench mounted machine is microprocessor controlled and incorporates world proven 32 bit technology for highly accurate load measurement and rapid data acquisition. The LS100Plus features an integral user interface consisting of a side mounted control console with large, positive action membrane keys, allowing complex tests to be performed at the touch of a button. A back lit 4 line LCD display shows the test and set-up information in a wide choice of user selectable languages and units. The stand alone system is capable of storing up to 600 test results from a choice of ten programmable Features • Simple to set up, operate and maintain • High accuracy load measurement • Constant load holding • Data sampling rate 8 kHz • Load rate control • Saves up to 600 test results • 10 programmable test set-ups • Pre-loading of samples and cycling to load or extension limits test set-ups. Test parameters are entered using the keypad in a sequential menu driven format. For additional flexibility, the LS100Plus can also be connected to a personal computer with optional Lloyd Instruments NEXYGENPlus material test and control software. NEXYGENPlus software provides almost unlimited testing and results processing capability in a familiar Windows® environment. The high stiffness frame incorporates a crosshead guidance system to prevent side loading of the sample under test. The crosshead is driven by twin lead screws and a high precision servo motor and DC servo system to achieve a wide range of speeds. A series of highly accurate, interchangeable load cells is available for tension, compression and cycling through zero force measurements. Our extensive range of grips and fixtures support virtually any type of test. The system is ideal for use in production, quality control, educational and research environments. • Multi-stage testing with NEXYGENPlus software • Extension resolution <0.03 microns • Multi-lingual display options • Multi-unit display options • Flash upgradeable • Wide selection of load cells, grips, jigs, extensometers, temperature chambers and other accessories Force Capacity: LS100Plus (Standard) LS100Plus-E (Extended) Crosshead Speed Range: Specification Sheet September 2009 SS-MT-6266-0909 © 2009 by AMETEK, Inc. Speed Accuracy: Maximum Crosshead Travel LS100 Plus LS100Plus-E Width Between Columns: Minimum Load Resolution: Load Cell Accuracy: Extension Resolution: Data Sampling Rate: Display: Extensometer Inputs: Load Measuring System: Software: Supply Voltage: Weight: LS100 Plus LS100Plus-E Operating Temperature: 100 kN (22481 lbf) 100 kN (22481 lbf) 0.001 to 254 mm/min from 0 to 50 kN (0.00004 to 10 in/min from 0 to 11241 lbf) 0.001 to 101.6 mm/min from 50 to 100 kN (0.00004 to 4 in/min from 11241 to 22481 lbf) < 0.2% at steady state 842 mm (32.4 in) 1012 mm (39.8 in) 404 mm (16 in) 0.0001 N (load cell specific) <0.5% <0.03 microns 8 kHz 40 character x 4 line backlit LCD Digital and Analogue EN ISO 7500:2004 Class 0.5 ASTM E4 NEXYGENPlus Data Analysis Software (optional) 230Vac ±10%, 50-60 Hz, Fuse T5AH250V 115Vac ±10%, 50-60 Hz, Fuse T10AH250V 200 kg (441 lb) 204 kg (450 lb) 5° to 35° C (41° to 95°F)

Open the catalog to page 1
LS100 Series - 2

Grips & Fixtures: A wide range of grips and fixtures are available. For further information see our grip specification sheets. Extensometers: We supply contacting and non-contacting extensometers. For further information see our extensometer specification sheets. Temperature Chambers and High Temperature Furnaces: A range of thermal chambers and furnaces are available. For further information see our specification sheets. Splinter Shields: Splinter shields can be supplied to your specific requirements. Contact Lloyd Instruments for further information. LS100P/us-CC Large Compression Cage...

Open the catalog to page 2

All AMETEK Sensors catalogs and technical brochures

  1. CS2

    8 Pages

  2. MT500 Series

    2 Pages

  3. LD Series

    3 Pages

  4. LR150K Plus

    2 Pages

  5. LR100K Plus

    2 Pages

  6. DMG Series

    3 Pages

  7. LG Series

    2 Pages

  8. DG Series

    3 Pages

  9. LR10K Plus

    2 Pages

  10. LTCM100

    3 Pages

  11. MT150

    2 Pages

  12. TT

    2 Pages

  13. Model 332

    3 Pages

  14. Model 329

    3 Pages

  15. MSE100

    3 Pages

  16. DG

    3 Pages

  17. DFE II

    4 Pages

  18. Ball Probes

    10 Pages

Archived catalogs