Catalogs >
AMETEK Sensors, Test & Calibration >
LR150KPlus Materials Testing Machine (150 kN)

LR150KPlus Materials Testing Machine (150 kN)
2Pages

Catalog excerpts

LR150KPlus Materials Testing Machine (150 kN) - 1

Specification Sheet 150 kN Universal Materials Testing Machine The LR150KP/us advanced materials testing machine incorporates an extensive range of features making it ideal for performing complex as well as routine testing applications up to 150 kN machine featuring a twin column design with a maximum crosshead travel of 1150 mm (45.3 in) Extended machine column options (LR150KP/us-E models) for testing higher elongation materials are also available. The machine is microprocessor controlled and ncorporates world proven 32 bit technology for highly accurate load measurement and rapid data acquisition. The LR150KP/us features an integral user interface consisting of a side mounted control console with large, positive action membrane keys, allowing complex tests to be performed at the touch of a button. A back lit 4 line LCD display shows the test and set up information in a wide choice of user selectable languages and units The stand alone system is capable of storing up to 600 test results from a choice of ten programmable test set ups. Test parameters are entered using the keypad in a sequential menu driven format. For additional flexibility, the LR150KP/us can also be connected to a personal computer with optional Lloyd Instruments NEXYGENP/us material test and control software. NEXYGEN software provides almost unlimited testing and results processing capability in a familiar Windows® environment. The high stiffness frame incorporates a crosshead guidance system to prevent side loading of the sample under test. Stiffness compensation on the LR150KP/us machine allows compensation to be made for any deformation, however small, of the load frame, load cell and grips of the instrument itself during compression testing. The crosshead is driven by twin lead screws and a high precision servo motor and DC servo system to achieve a wide A series of highly accurate, interchangeable load cells are also available for tension, compression and cycling through zero force measurements. Our extensive range of grips and fixtures support virtually any type of test. The system is ideal for use in production, quality control, education and research environments. • Simple to set up, operate and maintain • High accuracy load measurement • Constant load holding • Data sampling rate 8 kHz • Load rate control • Saves up to 600 test results • Pre-loading of samples and cycling to load or extension limits • Multi-stage testing with NEXYGENP/us software Extension resolution <0.04 microns Multi-lingual display options Multi-unit display options Flash upgradeable Extended column options for testing higher extension materials Wide selection of load cells, grips, jigs, extensometers, temperature chambers and other Force Capacity: Crosshead Speed Range: Speed Accuracy: Maximum Crosshead Travel Width Between Columns: Minimum Load Resolution: Load Cell Accuracy: Extension Resolution: Data Sampling Rate: Extensometer Inputs: Load Measuring System: Supply Voltage: Operating Temperature: 0.0001 N (Load cell specific) 40 character x 4 line backlit LCD NEXYGENP/L/S Data Analysis Software

Open the catalog to page 1

LR150KPlus Materials Testing Machine (150 kN) - 2

Accessories Item Part No HLC Series Load Cells: 50 N (11.25 lbf) 100 N (22.5 lbf) 500 N (112.5 lbf) 1000 N (225 lbf) 2500 N (562.5 lbf) 5000 N (1124 lbf) 10 kN (2248 lbf) 20 kN (4496 lbf) 30 kN (6744 lbf) 50 kN (11241 lbf) 150 kN (33722 lbf) 01/2936 01/2413 01/3213 01/2412 01/3214 01/2944 01/2411 01/3215 01/2978 01/3101 01/2458 Item Part No Application Software: NEXYGENPlus 40/0771 Item Grips & Fixtures: A wide range of grips and fixtures are available. For further information see our grip specification sheets. Extensometers: We supply contacting and non-contacting extensometers. For...

Open the catalog to page 2