LR150K Plus
2Pages

{{requestButtons}}

Catalog excerpts

LR150K Plus - 1

LLOYD W' INSTRUMENTS#!! An AMETEK Company LR150KP/tys 150 kN Universal Materials Testing Machine The LR150KP/us advanced materials testing machine incorporates an extensive range of features making it ideal for performing complex as well as routine testing applications up to 150 kN (33722 lbf) The LR150KP/us is a floor standing machine featuring a twin column design with a maximum crosshead travel of 1150 mm (45.3 in). Extended machine column options (LR150KP/us-E models) for testing higher elongation materials are also available. The machine is microprocessor controlled and incorporates world proven 32 bit technology for highly accurate load measurement and rapid data acquisition. The LR150KP/us features an integral user interface consisting of a side mounted control console with large, positive action membrane keys, allowing complex tests to be performed at the touch of a button. A back lit 4 line LCD display shows the test and set up information in a wide choice of user selectable languages and units. The stand alone system is capable of storing up to 600 test results from a choice of ten programmable test set ups. Test parameters are entered using the keypad in a sequential menu driven format. For additional flexibility, the LR150KP/us can also be connected to a personal computer with optional Lloyd Instruments NEXYGENP/us material test and control software. NEXYGEN software provides almost unlimited testing and results processing capability in a familiar Windows® environment. The high stiffness frame incorporates a crosshead guidance system to prevent side loading of the sample under test. Stiffness compensation on the LR150KP/us machine allows compensation to be made for any deformation, however small, of the load frame, load cell and grips of the instrument itself during compression testing. The crosshead is driven by twin lead screws and a high precision servo motor and DC servo system to achieve a wide range of speeds. A series of highly accurate, interchangeable load cells are also available for tension, compression and cycling through zero force measurements. Our extensive range of grips and fixtures support virtually any type of test. The system is ideal for use in production, quality control, education and research environments. Features • Simple to set up, operate and maintain • High accuracy load measurement • Constant load holding • Data sampling rate 8 kHz • Load rate control • Saves up to 600 test results • 10 programmable test set ups • Pre-loading of samples and cycling to load or extension limits • Multi-stage testing with NEXYGENP/us software • Extension resolution <0.04 microns • Multi-lingual display options • Multi-unit display options • Flash upgradeable • Extended column options for testing higher extension materials • Wide selection of load cells, grips, jigs, extensometers, temperature chambers and other accessories LR150KP/us-E (Extended) 150 kN (33722 lbf) Crosshead Speed Range: 0.001 to 254 mm/min (0.00004 to 10 in/min) Speed Accuracy: <0.2% at steady state Maximum Crosshead Travel: Specification Sheet September 2009 SS-MT-6268-0909 © 2009 by AMETEK, Inc. 1150 mm (45.3 in) 1620 mm (63.8 in) 620 mm (24.4 in) 0.0001 N (Load cell specific) <0.5% <0.04 microns 8 kHz 40 character x 4 line backlit LCD Digital and Analogue EN ISO 7500:2004 Class 0.5 ASTM E4 NEXYGENP/us Data Analysis Software (optional) 230Vac ±10%, 50-60 Hz, Fuse T5AH250V, 115Vac ±10%, 50-60 Hz, Fuse T10AH250V 900 kg (1984 lb) 910 kg (2006 lb) 5° to 35° C (41° to 95° F) LR150KP/us LR150KP/us -E Width Between Columns: Minimum Load Resolution Load Cell Accuracy: Extension Resolution: Data Sampling Rate: Display: Extensometer Inputs: Load Measuring System: Software: Supply Voltage: Weight: LR150KP/us LR150KP/us-E Operating T

Open the catalog to page 1
LR150K Plus - 2

HLC Series Load Cells: 50 N (11.25 Ibf) 01/2936 Item Grips & Fixtures: A wide range of grips and fixtures are available. For further information see our grip specification sheets. Extensometers: We supply contacting and non-contacting extensometers. For further information see our extensometer specification sheets. Temperature Chambers and High Temperature Furnaces: A range of thermal chambers and furnaces are available. For further information see our specification sheets. Splinter Shields: Splinter shields can be supplied to your specific requirements. Contact Lloyd Instruments for...

Open the catalog to page 2

All AMETEK Sensors catalogs and technical brochures

  1. CS2

    8 Pages

  2. MT500 Series

    2 Pages

  3. LD Series

    3 Pages

  4. LR100K Plus

    2 Pages

  5. DMG Series

    3 Pages

  6. LG Series

    2 Pages

  7. DG Series

    3 Pages

  8. LS100 Series

    2 Pages

  9. LR10K Plus

    2 Pages

  10. LTCM100

    3 Pages

  11. MT150

    2 Pages

  12. TT

    2 Pages

  13. Model 332

    3 Pages

  14. Model 329

    3 Pages

  15. MSE100

    3 Pages

  16. DG

    3 Pages

  17. DFE II

    4 Pages

  18. Ball Probes

    10 Pages

Archived catalogs