Catalogs >
AMETEK Sensors, Test & Calibration >
EZ50 Materials Testing Machine (50 kN)

EZ50 Materials Testing Machine (50 kN)
2Pages

Catalog excerpts

EZ50 Materials Testing Machine (50 kN) - 1

Specification Sheet EZ50 50 kN Universal Materials Testing Machine The EZ50 advanced materials testing machine ncorporates an extensive range of features making it ideal for performing complex as well as routine standard EZ50 features a twin column design with a crosshead travel range of 855 mm (33.7 in). Extended machine column options (EZ50-E models) for testing high elongation materials are also This bench mounted machine is microprocessor controlled and incorporates world proven 32 bit technology for highly accurate load measurement and rapid data acquisition. The EZ50 features an ntegral user interface consisting of a side mounted control console with large, positive action membrane keys, allowing complex tests to be performed at the touch of a button. A back lit 4 line LCD display shows the test and set up information in a wide choice of user selectable languages and The stand alone system is capable of storing up to 600 test results from a choice of ten programmable test set ups. Test parameters are entered using the keypad in a sequential menu driven format. • Simple to set up, operate and maintain • High accuracy load measurement • Constant load holding • Data sampling rate 8 kHz • Load rate control • Saves up to 600 test results • Pre-loading of samples and cycling to load or extension limits • Multi-stage testing with NEXYGENP/us software For additional flexibility, the EZ50 can also be connected to a personal computer with optional Lloyd Instruments NEXYGENP/us material test and control software. NEXYGEN software provides almost unlimited testing and results processing capability in a familiar Windows® environment. The high stiffness frame incorporates a crosshead guidance system to prevent side loading of the sample under test. The crosshead is driven by twin lead screws and a high precision servo motor and DC servo system to achieve a wide range of speeds throughout the full load range. A series of highly accurate, interchangeable load cells is available for tension, compression and cycling through zero force measurements. Our extensive range of grips and fixtures support virtually any type of test. The system is ideal for non- continuous testing use in production, quality control, education and research environments. Where continuous testing is required, we recommend the Lloyd Instruments LR50KP/us50 kN materials testing machine • Extension resolution < 0.03 microns • Multi-lingual display options • Multi-unit display options • Flash upgradeable • Extended column options for testing high extension • Wide selection of load cells, grips, jigs, extensometers, temperature chambers and other Force Capacity: Crosshead Speed Range: Speed Accuracy: Maximum Crosshead Travel Width Between Columns: Minimum Load Resolution: Load Cell Accuracy: Extension Resolution: Data Sampling Rate: Extensometer Inputs: Load Measuring System: Supply Voltage: Operating Temperature: (0.0004 to 10 in/min) at full load 0.0001 N (Load cell specific) 40 character x 4 line backlit LCD NEXYGENP/L/S Data Analysis Software

Open the catalog to page 1

EZ50 Materials Testing Machine (50 kN) - 2

Accessories Item Part No XLC Series Load Cells: 5 N (1.12 lbf) 10 N (2.25 lbf) 20 N (4.5 lbf) 50 N (11.25 lbf) 100 N (22.5 lbf) 250 N (56.25 lbf) 500 N (112.5 lbf) 1000 N (225 lbf) 2500 N (562.50 lbf) 5000 N (1124 lbf) 10 kN (2248 lbf) 20 kN (4496 lbf) 30 kN (6744 lbf) 50 kN (11241 lbf) 01/2946 01/2360 01/2950 01/2361 01/2480 01/3048 01/2362 01/2419 01/2363 01/2364 01/2365 01/2417 01/2366 01/2367 Item Part No Application Software: NEXYGENPlus 40/0771 Item Extensometers: We supply contacting and non-contacting extensometers. For further information see our extensometer specification sheets....

Open the catalog to page 2