Catalogs >
Ametek STC >
Crystal Pressure Fittings

Crystal Pressure Fittings
13Pages

Catalog excerpts

Crystal Pressure Fittings CPF Common Specifications (applies to all CPF fittings in this datasheet) | DESCRIPTION CPF* is an improved cone type fitting system that adds a unique o-ring sealing system which permits leak free connections without tools. CPF fittings can be directly connected to W" medium pressure cone type fittings from other manufacturers*, provided that wrenches are used to complete the connection. The fittings of the CPF system have been designed and tested to comply with ASME B31.3-2008, Chapter IX: High Pressure Piping. *U.S. Patent No. 8,794,677 * HiP: 1/4“ Female and Male Medium Pressure (LF4 & LM4 series) Autoclave Engineers: 1/4"Female and Male Medium Pressure (SF250CX series) Quick Links Click a Category to Navigate to its Page Most fittings thoughout this document meet the MAWP specificaton of 10000 psi/700 bar/70 MPa. Exceptions are labeled with an icon (or H and a key to indicate the pressure rating. Non-Crystal MP adapters require wrench tightening. Maximum Allowable Working Pressure (MAWP): 10 000 psi / 700 bar / 70 MPa Finger-tight: -20 to 50°C Wrench-tight: -40 to 150°C Minimum Hose Bend Radius: 1.0" (25mm) Note Regarding CPF Hose (MPH-X) Due to the wide variety of operating conditions it may be subject to, Crystal Engineering, as well as Distributors and Representatives of Crystal products, do not warrant that this hose is suitable for any specific use. This hose is not for use with compressed natural gas (CNG). When used with gases, fuels (liquid or gas) and refrigerants, permeation (i.e., seepage) will occur from inside the hose. In enclosed or unventilated spaces this permeation may result in high concentrations of vapors which are potentially flammable, explosive or toxic. Care must be taken to protect hoses from snagging, kinking, bending smaller than the minimum bend radius, and cutting. Any hose that has been damaged in any way should be removed from service and discarded immediately. Autoclave Engineers Fluid Components is a division of Snap-tite, Inc. HiP is High Pressure Equipment Company. Molykote is a registered trademark of Dow Corning Corporation. Viton is a registered trademark of DuPont Performance Elastomers. Swagelok is a registered trademark of Swagelok Company. Thread Type: 7/16-20 UNF 2B Cone Angle: 60°, nominal Fittings: High Strength 316 Stainless Steel Hose is not compatible with dioctyl sebacate fluid. Hose: Polyamide core with urethane jacket External Hose Diameter: 0.235" (6 mm) Internal Hose Diameter: 0.08" (2 mm) Hose Weight: 0.0179 lbs/ft (26.6 g/m) CAUTION: To achieve CPF maximum allowable working CPF Female O-rings: AS568A-012, Viton® 80 or 90 pressuresnoo-ringsubstitutionsareallowed #3981 O-ring Lubricant: Molykote® 55 Thread Lubricant: Use a process compatible fluid Ifa torque wrench isn't practical to use,

Open the catalog to page 1

CPF Fittings | HOSES (10000 psi) Crystal Pressure Fittings CPF Quick Links | CPF | NPT | BSP | M20 | Transmitter | Tube | AN4 | Pump Adapter | Non-Crystal Adapters | 4895.K Crystal Pressure Fittings Data Sheet AMETEK Page 2 of 13

Open the catalog to page 2

Open the catalog to page 3

Open the catalog to page 4

NPT Fittings | CPF MALE TO NPT MALE C5 Swivels Crystal Pressure Fittings CPF Quick Links | CPF | NPT | BSP | M20 | Transmitter | Tube | AN4 | Pump Adapter | Non-Crystal Adapters | 4895.K Crystal Pressure Fittings Data Sheet AMETEK Page 5 of 13

Open the catalog to page 5

Open the catalog to page 6

Crystal Pressure Fittings CPF Quick Links | CPF | NPT | BSP | M20 | Transmitter | Tube | AN4 | Pump Adapter | Non-Crystal Adapters | NPT Fittings | NPT MALE TO NPT QUICK TEST FEMALE (A) | NPT FITTING KITS Part Number Complete NPT Hose and Fitting Kit Includes: 1/8 NPT [Male (2), Male Quick Test, and Female Quick Test], 1/4 NPT [Male (2), Female, Male Quick Test, and Female Quick Test], 1/2 NPT [Female Quick Test], Tube [1/4 Male and 3/8 Male], Transmitter [5/16 Male], CPF Connectors [Male-Male, Plug, and Cap (2)], Hose [1 meter], and Custom Carrying Case. Includes: MPF-1/8QTF, MPF-1/4QTF,...

Open the catalog to page 7

Open the catalog to page 8

BSP Fittings | BSP FEMALE | BSP FITTING KITS Crystal Pressure Fittings CPF Quick Links | CPF | NPT | BSP | M20 | Transmitter | Tube | AN4 | Pump Adapter | Non-Crystal Adapters | Part Number Complete BSP Hose and Fitting Kit Includes: 1/8 BSP [Female, Male, and Female Quick Test], 1/4 BSP [Female, Male, and Female Quick Test (2)], 3/8 BSP [Female, Male, and Female Quick Test], 1/2 BSP [Female, Male, and Female Quick Test], Transmitter [5/16 Male], CPF Connectors [Male-Male, Plug, and Cap (2)], Hose [1 meter], and Custom Carrying Case. Includes: MPF-1/8QTFB, MPF-1/4QTFB, MPF-3/8QTFB, and...

Open the catalog to page 9