ASC-400 - Multifunction Signal Calibrator
12Pages

{{requestButtons}}

Catalog excerpts

ASC-400 - Multifunction Signal Calibrator - 1

Advanced Signal Calibrator User friendly and innovative TEST & CALIBRATION INSTRUMENTS

Open the catalog to page 1
ASC-400 - Multifunction Signal Calibrator - 2

Advanced Simplicity Optimal read out visibility and high accuracy Large full color display and extremely user friendly interface. The ASC-400 accuracy is designed to meet high demands from modern sensores and transmitters Input and output RTD: 16 different types, TC: 13 different types, Current 0-24 mA DC, Voltage 0-20 VDC, Frequency 0.05 to 10,000 Hz, Pulse train out-put, Resistance 5 to 4000 Ohm Simultaneoues read-back and fast RTD simulation Including isolated read-back from device-under-test of mA, V, and pressure. The RTD simulation feature is fast enough to work with pulsed...

Open the catalog to page 2
ASC-400 - Multifunction Signal Calibrator - 3

Terminal block Unique “non-menu” user interface Easy to use, single layer user interface, no deep menu structure! Operate and set up ASC-400 to perform your tasks, fast and intuitive. All input and output connectors are placed away from the display and keyboard to give maximum freedom to operate. Read-back display The upper half of the full color display is dedicated to the read-back signal from the device-under-test. This input section is electrically isolated from the circuitry. You can also read pressure from the pressure modules in this display section. We call it the wireless keyboard…...

Open the catalog to page 3
ASC-400 - Multifunction Signal Calibrator - 4

Fuseless protection If you by mistake connect the ASC-400 to over voltage, the unit is pro- tected with a fuseless protection feature. This feature protects the unit and prevents expensive repairs and recalibration of the unit. To avoid injury never connect the unit to the mains supply! Full storage, all settings on both upper & lower channel are stored. Customer defined memory names. Useful large soft case (Option q As an option you can get the ASC-400 delivered with a large padded soft case. The spacey soft case is designed for protection during trans- port. The soft case has separate...

Open the catalog to page 4
ASC-400 - Multifunction Signal Calibrator - 5

Gauge or Absolute pressure? (Option BARO) The BARO option turns any gauge measuring APM into an absolute measuring device. Accuracy: ± 0.5 mbarA / 0.00725 psiA Range: 700 to 1100 mbarA / 10.153 to 15.954 psiA Includes all effects of linearity, hysteresis, temperature (-10 to 50°C / Please note the BARO option is factory installed. APM Pressure Modules (Accessory) When used with APM CPF Series pressure modules the ASC-400 be- comes a true pressure calibrator with features such as; leak test, switch test, scaling and online % error calculations. Pressure range from vacuum to 1 000 bar /15 000...

Open the catalog to page 5
ASC-400 - Multifunction Signal Calibrator - 6

Specifications Temperature Sensor (Option T) • Temperature sensor, -40 to 155°C/-40 to 311°F • Delivered with international traceable calibration certificate and CvD coefficients, ready to enter into any ASC • Sensor dimensions ø 4 x 200 mm + handle • Calibration points, -40,-20,0,50,100,155°C/-40,-4,32,122,212,311°F • Calibration accuracy ± 0.030°C/0.054°F

Open the catalog to page 6
ASC-400 - Multifunction Signal Calibrator - 7

Specifications Thermocouple mV TC mV read TC mV source CJC outside above Volt V Maximum current output is 3 mA Output impedance 0.010 ohm. Cold junction True Ohm Measurement current (pulsed) 0.25 mA. 3W measurement current match 1% Source exitation current IEXI(max) = 2.0 V / R, IEXI must never exceed 3 mA. Pulsed current (source) Unit is compatible with smart transmitters and PLCs with pulse > 5 ms. Read (Isolated) Read (non-isolated) Maximum current output in voltage ranges is 3 mA Output impedance 0.050 ohm / Input resistance 1 Mohm Frequency KHz source Pulse (source only) Rate: 1 Hz to...

Open the catalog to page 7
ASC-400 - Multifunction Signal Calibrator - 8

Thermo couple Type Does not include thermocouple wire error and CJC.

Open the catalog to page 8
ASC-400 - Multifunction Signal Calibrator - 9

Read accuracy is based on 4 wire input. Source accuracy in terminals 2 wire source.

Open the catalog to page 9
ASC-400 - Multifunction Signal Calibrator - 10

Specifications Pressure modules, Barometric option (BARO) and APM CPF 12 month Accuracy ± 0 to 30 % range Absolute pressure 12 month Accuracy ± 30 to 110% range 12 month Accuracy ± Vacuum % FS APM CPF with ASC-400 BARO option / 12 month Accuracy ± Specified temperature range -10 to 50°C / 14 to 122°F (APM CPF & BARO option) Vacuum FS, 1 bar / 100 kPA / 14.5 psi. F.S. (full scale) is the numerical value of the positive pressure range. Accuracy includes hysteresis, nonlinearity, repeatability and reference standard uncertainty, 1 Year typical longterm stability, operated inside the rated...

Open the catalog to page 10
ASC-400 - Multifunction Signal Calibrator - 11

Standard delivery • 2 sets of test leads & test clips (black & red) Handy soft case, with pocket for the test leads and an opening in the top to provide easy access to the test terminals Full international traceable calibration certificate Multi-function Signal Calibrator BARO Barometric module to absolute pressure mode (optional) Certificate F Traceable Certificate to International Standards Accredited Certificate - ISO17025 (optional) Accessories (Optional) A B Large padded soft case with shoulder strap Power Supply /Charger plus 6 x Ni-MH rechargeable AA External Power Supply Temperature...

Open the catalog to page 11
ASC-400 - Multifunction Signal Calibrator - 12

Extension Cable for Type K - 5 m Extension Cable for Type N - 5 m Thermocouple Male Plug - Type Cu-Cu - White Thermocouple Male Plug - Type R / S - Green Thermocouple Male Plug - Type K - Yellow Thermocouple Male Plug - Type J - Black Thermocouple Male Plug - Type T - Blue Thermocouple Male Plug - Type N - Orange 2206011 Thermocouple plug + K wire + alligator 2206012 Thermocouple plug + T wire + alligator 124720 External Power Supply / Charger 9VDC/200mA - 230VAC/115VAC 6x 1.5V AA Ni-MH rechargeable batteries 65-PT100-LB-CABLE - Cable 2 m (6.6 ft.) with LEMO/Banana connectors XXXX Various...

Open the catalog to page 12

All Ametek STC catalogs and technical brochures

  1. PTC-125 Cooler

    12 Pages

  2. PTC Series

    13 Pages

  3. CPF

    4 Pages

  4. 30 series

    4 Pages

  5. JofraCloud

    6 Pages

Archived catalogs

  1. HPC40 Series

    7 Pages