*mydirectindustry

i/iX Series II

Product catalog summary

Overview: The iX Series II by California Instruments is a versatile AC and DC power source with an integrated power analyzer, designed to replace multiple instruments with a single unit, offering cost-effective multifunctional testing capabilities.

Specifications: The iX Series II provides output power from 3000 VA to 15000 VA in both AC and DC modes, supporting a power factor range from 0 to 1. Key features include arbitrary waveform generation, digital power analysis, and scope capture capability. It complies with EN61000-3-2 and EN61000-3-3 standards for harmonics and flicker testing.

Design and Usability: The system is designed for rack mounting with a 4U chassis, eliminating the need for external devices. It features a user-friendly front panel keypad and a large control knob for easy parameter adjustments.

Applications: Suitable for product evaluation, avionics, and regulatory compliance testing, the iX Series II supports high load current, multi-phase output modes, and built-in power analyzer measurements.

Advanced Features: Includes line distortion simulation, programmable output impedance, and transient generation capabilities. It supports harmonic and arbitrary waveform generation for detailed testing and simulation.

Remote Control and Software: The system supports remote control via IEEE-488 and RS232C interfaces using the SCPI command protocol, with Windows-based software for easy access to its features.

Measurement and Analysis: Provides conventional measurements such as frequency, Vrms, Irms, and power factor, along with harmonic analysis and waveform acquisition capabilities, displaying data in tabular and graphical formats.

Operating Modes and Performance: Supports AC, DC, and AC+DC modes with precise load regulation and low harmonic distortion. Features constant power mode and programmable output impedance for specific testing needs.

Specifications Overview: Detailed specifications include measurement standards, output capabilities, system interfaces, and physical dimensions, certified under ISO 9001:2000.

Measurement Standards: AC measurements cover a frequency range of 16-500 Hz, with RMS voltage up to 300 V and current up to 40 A. Harmonics are measured from 16 Hz to 48 kHz.

Output Capabilities: In DC mode, maximum power output varies by model, with voltage ranges of 200 Vdc and 400 Vdc. In AC+DC mode, full AC power is available if the DC component is less than 20% of full-scale voltage.

System Interface: Includes IEEE-488 and RS232C interfaces for remote control, with options for synchronization and protection.

Physical Dimensions and Environmental Conditions: Dimensions are Height 7”, Width 19”, Depth 24”. Operating temperature range is 0 to 40°C, with storage from -20 to +85°C.

Additional Features: Offers harmonic and transient programming, arbitrary waveform generation, and built-in digital power analysis. Available in various models and configurations for single and three-phase operations.

Compliance and Safety: Meets IEC61010, EN50081-2, EN50082-2, and CE EMC and Safety Mark requirements, with RFI suppression compliant with CISPR 11, Group 1, Class A.

Catalog excerpts

i X Series II:AC, DC or AC+DC i Series II:AC or DC > Note: Voltage on 300 V range derates from 300 Vrms max at 500 Hz to 150 Vrms max at 1000 Hz; See V-F rating chart. below) Note: Constant power mode provides increased current at reduced voltage (See chart below) Model3001 i / i X5001 i / i X9003 i / i X9003 i / i X > 300 250 ) S FullPower M 200 R ( t l o Volt(RMS) V V V 150 100 50 16 200 400 500 600 800 1000 16 200 4 00 5 00 600 800 1000 Frequency (Hz) Frequenc y ( H z) Note: Specications are subject to change without notice. Specications are warranted over an ambient temperature range of 25б...

Open the catalog to page 5

Model Output Phase Max. current per phase Input Power Output Low V range High V range Voltage > 2 3001 i / i X 3 kVA 1 22 15.6 11 7.8 208-240V5001 i / i X 5 kVA 1 37 26 18.5 13 208-240V 5001 i / i X-400 5 kVA 1 37 26 18.5 13 400-480V9003 i X > 1 9 kVA 3 22 15.6 11 7.8 208-240V10001 i / i X > 1 10 kVA 1 74 52 37 26 208-240V 10001 i / i X-400 > 1 10 kVA 1 74 52 37 26 400-480V10002 i X Switches between 1 and 3 phase output modes, for 9003 i / i X > 1 10 kVA 2 37 26 18.5 13 208-240V 10002 i X or 15003 i / i X only.OMNI-1-18 i / i X-400 > 1 10 kVA 2 37 26 18.5 13 400-480V15001 i Impedance matching...

Open the catalog to page 8

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list