eLOAD LOADS PROGRAMMABLE DC ELECTRONIC Industry-trusted AMETEK eLoad brand providing testing solutions across diverse applications in Telecommunications, Oil/Gas, Utility sector to Alternative Energy fuel cells and Electric Vehicle system testing. 60W-200kW up to 1,250+V and 5,000A High-voltage High-current Ultra-low Voltage Air-cooled Water-cooled Ethernet

AMREL Power, acquired by AMETEK, Inc. in 2010, now joins AMETEK’s San Diego-based Programmable Power Division. The AMREL brand boasts the award winning eLOAD line of Air and Water-cooled Electronic Loads up to 200kW+, 5000Adc and 1200Vdc ratings, an array of Fuel Cell Testing Solutions (0-Volt & ultra-low voltage eLOADs and Frequency Response Analyzer), and the ePOWER line of Programmable switching mode & Linear Power Supplies from 15W-150kW+ and up to 2500Adc and 1000Vdc. AMETEK Programmable Power is the new global leader in the design and manufacture of precision, programmable power supplies...

__________________________________________________________________________________ 1 AMREL eLoad SELECTION GUIDE __________________________________________________________________________________ WHY AMREL 2 How is AMREL Customer Driven 3 AMREL Sets New Standards __________________________________________________________________________________ 4-5 eLoad PROGRAMMABLE LOAD BANK SOLUTIONS LPL Series of Low-profile 1U Air-cooled eLoad Solutions 300 ~ 800W/60 ~ 800Vdc/3 ~ 100Adc or Custom-tailored Ratings Available Interfaces: RS-232, GPIB, Ethernet and USB __________________________________________________________________________________...

AMREL eLOAD SELECTION GUIDE 1. Choose your maximum power level. How To Order 2. Select your required maximum voltage Power V-Max A-Max 3. Find your maximum current requirement Ex: PLA 1/5k 120Vdc 300Adc 4. Select the product series from the color legend below Other standard power, voltage and current ratings are available - please contact AMREL if your required rating is not shown below Maximum Current Maximum Power Level PEL SERIES LPL SERIES FEL SERIES PLA SERIES ZVL SERIES PLW SERIES BPL SERIES FCL SERIES * Please Note: Custom-tailored ranges are available. All series with the exception of...

AMREL LOAD CONTINUES THE HIGHEST POWER DISSIPATION DENSITY CICG DOOD SAVE RACK SPACE! eLoad has the industry's smallest footprint with the highest current, voltage & power ratings available. eLoad HAS FIELD ENABLED ETHERNET/USB - SAVING As your needs evolve, so will your eLoad. When you're ready to add the Ether- net and/or USB functionality to your eLoad, a simple phone call is all it takes! eLoad PROVIDES ANTI-CONDENSATION PROTECTION Aself-decondensation circuit is provided to eliminate internal condensation. The STANDARD WITH eLoad ■ PC SOFT PANEL & VOLTAGE/CURRENT DATA CAPTURE TO STORE TEST...

In ATE System Applications, rack space is a highly coveted asset. Traditional modular loads require at least 3U (5.25”) of rack space, additional mainframe cost, and are limited in power rating, typically below 300W. Why spend your rack space and budget when you don’t need to? • Battery/Energy Storage/Ultracapacitor Testing and Validation • dc Power Supply and Battery Charger Validation and Testing • Fuel Cell Durability, Lifetime and Performance Characterization • Single Cell and Short Stack Fuel Cell Characterization • EIS/Impedance Measurement • Defense/Aerospace and Avionics ATE, Electronics...

LOW-PROFILE PROGRAMMABLE AIR-COOLED eLOAD BANK SOLUTIONS Key Features & Benefits • roadest Model Selection: 150W, 300W, 600W, 800W Models: 60V, 120V, B 400V, 600V, 800V • Save Rack Space: All LPL Models are 1U high & “Zero” Stackable • Maximize ROI: In-rack Closed-case Calibration • Ultra-low Compliance Voltage: Ultra-low Voltage Operation • Reliable: Individual FET Protection to Isolate Power Stage Failures • aximized Uptime: Redundant Over-temperature and Over-power Protection M • Fast Response: 25us Independently Programmable Rise/Fall Time • uiet: Fan Speed Control for Reduced Acoustic Noise...

Traditional dc Electronic Load Solutions are bulky and large in size. Most are offered with standard voltage, current and power ratings. In the ATE world, rack space is a highly coveted asset and application demands are constantly diversifying with new technology development. AMREL’s PLA Series of “Air-cooled” dc Electronic eLoads offers the industry’s smallest footprint, the highest power density and current rating, along with the broadest selection of high voltage models on the market. PLA models are capable of being custom-tailored to meet your application requirements. • Battery/Energy Storage/Ultracapacitor...

PROGRAMMABLE AIR-COOLED eLOAD BANK SOLUTIONS Key Features and Benefits • roadest Model Selection: 800W, 1.5kW, 2kW, 2.5kW, 3kW, 4kW, 5kW, 7.5kW, B 10kW, 15kW, 20kW Models and Higher-power PLA Systems Over 100kW • xclusive High Voltage Models: Standard 60V, 120V, 400V & 600V Voltage E Ratings and widest selection of exclusive 800Vdc and 1,250Vdc PLA Models • ave Rack Space: PLA Models Offer Ultra-compact air-cooled Footprint and S are “Zero” Stackable • aximize ROI: In-rack Closed-case Calibration Without an “Outside” M Calibration Lab • ltra-low Compliance Voltage: Ultra-low Voltage Operation...

Traditional Water-cooled dc Electronic Load Solutions are bulky, have limited power handling capability, and are prone to water cooling issues such as condensation and external water valve considerations. Furthermore, only standard voltage, current and power ratings are offered. Rack space, reliability, and the right-solution fit are key parameters for lights-out burn-in of power components, fuel cells, batteries, power supplies, alternators and other electronics. • Battery/Energy Storage/Ultra Capacitor Testing and Validation • Fuel Cell Durability, Lifetime and Performance Characterization...