Sorensen™ Asterion® DC ASA Series Multiple-Output Programmable Power Supply with Touch Screen Display (600 W per Channel, 1800 W Total, 60-400 V, 6-42 A) The Sorensen™ Asterion® DC ASA Series is the newest addition to the Asterion platform of power testing solutions. The new ASA Series features up to three independent, isolated, extended wide-range outputs in a 1U high chassis. The autoranging supplies feature expanded current and voltage range at the full output power level, enabling the ability to satisfy a wider testing need without requiring the purchase of additional models. The Asterion DC ASA Series, just like the Asterion DC Series, offers complete remote programming and control via Virtual Panels™ GUI, and intuitive front panel touch screen operation. Additionally, the instrument can be controlled via standard LXI Ethernet, USB, and RS232 control interfaces, as well as through the optional GPIB control interface. Advanced Intelligent Control The Asterion DC ASA Series is operated from the intuitive, easy-to-use front panel touch screen display. Quickly access output programming parameters, measurements, configuration and system settings from the touch screen interface. Functions and parameters can be directly selected from the touch screen or by using the encoder selector button. The control resolution is adjusted by a dynamic rate change algorithm that combines the benefits of precise control over small parameter changes with quick sweeps through the entire range. • Three 600W channels in a 1U chassis up to 1800W total • Mix or match any three of four available output channel options • 3-Phase AC Input options for system phase balancing • Intuitive touch panel control • Multi-channel programmable sequencing, ramps and delays • Full remote control via Virtual Panels™ Asterion DC Virtual Panels GUI Asterion DC ASA Series I-V Curve Asterion DC ASA Series I-V Curve Current (Amps) 9250 Brown Deer Road, San Diego, CA 92121 USA • 858-458-0223

Avionics Test Power Simulation Sorensen Asterion DC Series: Product Specifications & Details Output Specifications (Autoranging) – Choose up to three channels of any configuration output (1) Channel Models Voltage Ripple & Noise RMS, mV (2) Voltage Ripple & Noise PK-PK, mV (3) Channel 3 blank, only Channel 1 and 2 populated. 1) Channel configuration installed at factory, not field replaceable. 2) RMS ripple/noise, over 20 Hz to 300 kHz bandwidth, is measured directly across the output terminals with the supply operating into 90% of rated resistive load in all channels and nominal AC input line...