AMETEK . PROCESS INSTRUMENTS PRODUCT DATA SHEET ta5000 Gas Analyzers Trace level gas monitoring for bulk gas, environmental and research laboratory applications The ta5000 range is a family of instruments designed to monitor trace levels of specific impurities in bulk gases, environmental applications and research applications. All ta5000 instruments include a dedicated sample processing system, a single high-sensitivity detector, and on-board analysis electronics. There are two models of the ta5000: ta5000R - Reduction gas detector (RGD) • Detects hydrogen (H2), carbon monoxide (CO) and unsaturated hydrocarbons ta5000F - Flame ionization detector (FID) • Detects carbon dioxide (CO2), methane (CH4) and nonmethane hydrocarbons Advanced detector technology The ta5000 gas analyzer is an isothermal gas chromatograph (GC) configured with either a RGD or FID. The chromatographic hardware of the ta5000 is available in several configurations, each of which enables the instrument to perform a highly specialized task. Unique system combination The primary strengths of the ta5000 detectors are extreme sensitivity from parts per million (ppm) down to low parts per billion (ppb) levels and negligible matrix effects from permanent gases. This sensitivity, combined with the separating power of GC, makes for a truly unique system. Effective monitoring technology The ta5000 is designed for continuous operation. Configured for a traditional 19-inch industrial rack installation, its sturdy construction also makes it suitable for transport to the field for surveys and spot tests. The ta5000 can also monitor several sampling points when interfaced with the Sigma4000 Multipoint Stream Selector. The on-board microprocessor controls the stream selector, stored calibration parameters and processes data in a variety of formats. Trace viewer software formats data, reports, alarm status and stores chromatograms on a local PC. The MGB1000 Micro Gas Blender is a complementary accessory for low concentrations and analyzer performance validation. Hkey benefits • High sensitivity • Broad detection range • Cost-efficient maintenance and operation • Best value and performance • Expandable with multipoint stream selector ^ APPLICATIONS • Reduction gas detector • Trace level detection of CO in the atmosphere • Measurement of dissolved H2 in water (H2O) • Bulk gas certification • Monitoring of ethylene (C2H4) in ambient air • Measuring safe levels of ethylene oxide (C2H4O) in air • Certification of gas purifier efficiency • Flame ionization detector • Trace CH4, CO2 and non-methane hydrocarbons in inert gas streams • Measurement of hydrocarbons in air • Hydrocarbons in H2O head space • Monitoring hydrocarbon impurities in oxygen (O2) or clean dry air (CDA) m KEY MARKETS • Air separation • Semiconductor manufacturing • LCD/LED display manufacturing • Polyethylene/polypropylene

PRODUCT DATA SHEET PERFORMANCE SPECIFICATIONSta5000R and ta5000F specifications ta5000R Specifications © 2018, by AMETEK, Inc. All rights reserved. Printed in the U.S.A. F-0191 Rev 7 (0918) One of a family of innovative process analyzer solutions from AMETEK Process PROCESS INSTRUMENTS Instruments. Specifications subject to change without notice.