Catalogs >
AMETEK Process Instruments >
ta3000 Gas Analyzers

ta3000 Gas Analyzers
2Pages

Catalog excerpts

AMETEK , PROCESS INSTRUMENTS A PRODUCT DATA SHEET ta3000 Gas Analyzers Trace level gas monitoring for bulk gas, environmental and research laboratory applications The ta3000 is a family of instruments designed to monitor trace levels of specific impurities in bulk gases, environmental applications and research applications. All ta3000 instruments include a dedicated sample processing system, a single high sensitivity detector, and on-board analysis electronics. There are two models of the ta3000: ta3000R - Reduction gas detector • Detects hydrogen (H2), carbon monoxide (CO), and unsaturated hydrocarbons ta3000F - Flame ionization detector • Detects carbon dioxide (CO2), methane (CH4), and non-methane hydrocarbons Advanced detector technology The ta3000 gas analyzer is an isothermal gas chromatograph configured with either a reduction gas detector or flame ionization detector. The chromatographic hardware of the ta3000 is available in several configurations, each of which enables the instrument to perform a highly specialized task. Unique system combination The primary strengths of the ta3000 detectors are extreme sensitivity from parts-per-million (ppm) down to low parts-per-billion (ppb) levels and negligible matrix effects from permanent gases. This sensitivity, combined with the separating power of gas chromatography, makes for a truly unique system. Effective monitoring technology The ta3000 is designed for continuous operation. Configured for a traditional 19-inch industrial rack installation, its sturdy construction also makes it suitable for transport to the field for surveys and spot tests. When interfaced with the Sigma4000 multipoint stream selector, the ta3000 can monitor several sampling points. The on-board microprocessor controls the stream selector, stored calibration parameters and processes data in a variety of formats. Trace viewer software formats data, reports, alarm status, and stores chromatograms on a local PC. The MGB1000 micro gas blender is a complementary accessory for low concentrations and analyzer performance validation. KEY BENEFITS • High sensitivity • Broad detection range • Cost-efficient maintenance and operation • Best value and performance • Expandable with multipoint stream selector El APPLICATIONS • Reduction gas detector • Trace level detection of CO in the atmosphere • Measurement of dissolved H2 in water • Bulk gas certification • Monitoring of ethylene in ambient air • Measuring safe levels of ethylene oxide in air • Certification of gas purifier efficiency • Flame ionization detector • Trace CH4, CO2 and non-methane hydrocarbons in inert gas streams • Measurement of hydrocarbons in air • Hydrocarbons in water headspace • Monitoring hydrocarbon impurities in oxygen or clean dry air FI KEY MARKETS • Air separation • Semiconductor • Environmental • LCD/LED display manufacturing • Polyethylene/polypropylene

Open the catalog to page 1

PRODUCT DATA SHEET PERFORMANCE SPECIFICATIONS ta3000R Specifications * A factory certified LDL of 25 ppb H2 in helium sample gas can be provided using a helium carrier gas. © 2019, by AMETEK, Inc. All rights reserved. Printed in the F-0190 Rev 8 (0119) One of a family of innovative process analyzer solutions from AMETEK Process PROCESS INSTRUMENTS Instruments. Specifications subject to change without notice.

Open the catalog to page 2

ta3000 Gas Analyzers 2Pages

Catalog excerpts

All AMETEK Process Instruments catalogs and technical brochures

ta3000 Gas Analyzers
2Pages