Catalogs >
AMETEK Process Instruments >
3050-SLR for Super Low Range Moisture Analysis

3050-SLR for Super Low Range Moisture Analysis
2Pages

Catalog excerpts

3050-SLR for Super Low Range Moisture Analysis - 1

AMETEK PROCESS INSTRUMENTS PRODUCT DATA SHEET 3050-SLR for Super Low Range Moisture Analysis Quartz-crystal microbalance (QCM) technology: accurate, reliable, verifiable and responsive The 3050-SLR provides an extremely accurate measurement of trace levels of moisture in a gas through the use of a quartz-crystal oscillator sample cell. This analyzer brings the benefits of quartz-crystal technology to a broad spectrum of low-range moisture measurement applications. Direct measurement of concentration The 3050-SLR measures moisture concentration directly in parts per million by volume (ppmv), parts per million by weight (ppmw), or mass of water per standard volume without additional pressure or temperature compensation. For customers who wish to convert concentration to dew/frost point, the 3050-SLR can be programmed for a live process pressure input or a fixed process pressure. Accurate and responsive The accuracy of the 3050-SLR is ±0.03 ppmv or ±10% of reading, whichever is greater, over the calibrated range of 0.1 to 100 ppmv. The design of the 3050-SLR enables a speed of response that is far superior to other analyzers, while consuming as little as 150 standard cubic centimeters per minute (sccm) of sample gas. The reliability and stability of the QCM sensor eliminates the need for routine factory recalibration requirements. On-line verification ability The 3050-SLR is equipped with the ability to self-verify its accuracy and sensitivity to moisture. This can be done on a programmed schedule, or whenever necessary. With a built-in zero module and internal moisture generator, the 3050-SLR provides data you will have confidence in. If necessary, the analyzer can make small corrections to its calibration automatically. If a severe calibration problem exists, the analyzer will provide an alarm. ■key benefits • Most accurate trace moisture measurement technology available • Fast response to changing moisture levels • Specific to moisture in most applications • Rugged sensor E APPLICATIONS • The 3050-SLR is specifically designed to monitor trace moisture levels n KEY MARKETS • Petrochemical • Natural gas • Refinery • Chemical

Open the catalog to page 1

3050-SLR for Super Low Range Moisture Analysis - 2

3050-SLR for Super Low Range Moisture Analysis AMETEK* PROCESS INSTRUMENTS © 2018, by AMETEK, Inc. All rights reserved. Printed in the U.S.A. F-0126 Rev 10 (0918) One of a family of innovative process analyzer solutions from AMETEK Process Instruments. Specifications subject to change without notice.

Open the catalog to page 2