Diaphragm Seals Type E Series Economy Diaphragm Seals DESCRIPTION Pressure Applied (Inches H2O) • All welded 316L SST construction meets EPA 1990 Clean The Mansfield & Green E Series Diaphragm Seals Air Act Standards are miniature seal elements designed for operations - No gasketing - No bolting in new construction and MRS applications. These all• Materials available for corrosive applications welded, 316L stainless • Ideal for low pressure applications steel seals are an - uperior low pressure response with .002” thick S diaphragm excellent alternative - Minimum volumetric displacement where process to high-cost custom temperatures exceed 250°­ (121°C) F or specialty seals. • Seal ratings to 5000 psig (345 bar) They feature a • ompatible with most 100mm (pressure range over 100 C diaphragm that is psi) and smaller gauges welded directly to the housing. E Series seals are Type EW with a ideal for any application 100mm Model 659 Gauge where process media and pressure pulsation may 16 adversely affect the life of the gauge component. Typical 14 applications include spray 12 paint equipment, agricultural equipment, water 10 and waste equipment, and chlorine treatment Optimum Volumetric 8 equipment. Displacement 6 E Series seals feature a unique construction that 4 is free of bolts and gaskets. These seals protect 2 against leakage and fugitive emissions as defined by the EPA Clean Air Act of 1990. 0 0.002 0.004 0.006 0.008 0.01 0.012 0.014 0.016 0.018 0.02 The E Series’ compact design allows for Displacement Volumes installation in applications where space is limited. (Cubic Inches) These seals operate with most 100mm and smaller gauges. ALL ORDERS CAN BE SENT TO: On-line fax: 215-323-9450 or e-mail to [email protected] © 2008, by AMETEK, Inc. All rights reserved. Printed in the U.S.A. 908PDF (160166) Sales/Technical Support: 215-257-6531 900 Clymer Avenue Sellersville, PA 18960 U.S.A. Customer Service: 727-536-7831 8600 Somerset Drive Largo, FL 33773 U.S.A. Specifications are subject to change without notice. Visit our Web site for the most up-to-da