Product Data ELECTRONIC PRESSURE MEASUREMENT PRODUCTS Model DDMC Digital Meter/Controller DESCRIPTION The AMETEK Model DDMC Digital Meter/Controller powered by 85 to 265 VAC will display data from transmitters, transducers, scales, and other process instruments. It provides 24 volt excitation, alarm relays, and optional analog output for process control functions. Display: Main display: 0.60" (15 mm) high, red LEDs Second display: 0.46" (12 mm) high, red LEDs 6 digits each (-99999 to 999999), with lead zero blanking Display Intensity: Eight user selectable intensity levels Display Update Rate: 5/second (200 ms) Overrange: Display flashes 999999 Underrange: Display flashes -99999 ●● NEMA 4X, IP65 front ●● Universal 85-265 VAC or 12/24 VDC input power Programming Methods: Four front panel buttons, digital inputs, PC and multi-point linearization utility, or cloning using Copy function. ●● Large dual-line 6-digit display, 0.60" and 0.46" Noise Filter: Programmable from 2 to 199 (0 will disable filter) ●● Dual-scale for level applications – single input ●● Isolated 24 VDC @ 200 mA transmitter power supply ●● Math functions for flow and round horizontal tanks ●● Programmable displays and function keys ●● 32-point, square root, or exponential linearization ●● Multi-pump alternation control Filter Bypass: Programmable from 0.1 to 99.9% of calibrated span Recalibration: All ranges are calibrated at the factory. Recalibration is recommended at least every 12 months. Max/Min Display: Max/Min readings reached by the process are stored until reset by the user or until power to the meter is turned off. (specifications continued on next page) ●● 2 or 4 relays and isolated 4-20 mA output options ●● External 4-relay expansion module option allows for up to 8 relays maximum ●● USB serial communication option ●● MODBUS ® RTU communication protocol standard (requires serial communication adapter) ●● Configure, monitor and datalog from a PC with free DDMC Meter View software ●● Onboard digital input Model DDMC Digital Meter/Controller in NEMA 4 Enclosure with readout close-up above Sales/Technical Support Telephone: +1 215-355-6900 or e-mail: [email protected] 820 Pennsylvania Boulevard | Feasterville, PA 19053 U.S.A. | Order Fax: +1 215-354-1802 © 2015, by AMETEK, Inc. All rights reserved. Printed in the U.S.A. K796495 – Effective: 9-2015, Supersedes: New (110131) Specifications are subject to change without notice. Visit

Product Data ELECTRONIC PRESSURE MEASUREMENT PRODUCTS Model DDMC Digital Meter/Controller SPECIFICATIONS (continued) Password: Three programmable passwords restrict modification of programmed settings. Pass 1: Allows use of the F1–F3 function keys Pass 2: Allows use of the F1–F3 function keys and changing the set/reset points Pass 3: Restricts all programming and F1–F3 keys Note: Digital inputs are not password protected, except programming functions. Non-Volatile Memory: All programmed settings are stored in non-volatile memory for a minimum of ten years if power is lost Power Options: Standard...

Product Data ELECTRONIC PRESSURE MEASUREMENT PRODUCTS Model DDMC Digital Meter/Controller Model Numbering: DDMC digital meter/contoller DDMC Digital meter/controller DDMCD 12/24 DC input only Meter output A B C D 2 relays 2 relays, analog output 4-20mA 4 relays Display ONLY, no relays Housing 0 1 Panel mount NEMA 4X weathertight housing DC surge protection** 0 1 2 3 No DC surge protection Surge protection for signal line between meter and transmitter (LM912) Surge protection for signal line between meter and customer equipment (LM912) Surge protection for signal line between meter and transmitter...

Product Data ELECTRONIC PRESSURE MEASUREMENT PRODUCTS Model DDMC Digital Meter/Controller Meter Copy Manual Output Control The Copy function is a standard feature used to copy (or clone) all the settings from one meter to other meters requiring exactly the same setup and programming (i.e. type of input, scaling, decimal point, filter, bypass, etc.). Take control of any output with this feature. All relays can be forced ON or OFF, and the 4-20 mA output signal can be set to any value within its range. When the relays and 4-20 mA output are controlled manually, an LED labeled “M” is turned on and...

Product Data ELECTRONIC PRESSURE MEASUREMENT PRODUCTS Model DDMC Digital Meter/Controller Serial Communications USB Serial Adaptor Kit - Allows for direct connection of a DDMC meter to the USB port of a PC. Required for free Meter View software download and PC programming. Process Input Inputs: Field selectable: 0-20, 4-20 mA, ±10 VDC (0-5, Accuracy: ±0.03% of calibrated span ±1 count, square root and programmable exponent accuracy range: 10- Temperature Drift: 0.005% of calibrated span/°C max from 0 to 65°C ambient, 0.01% of calibrated span/°C Math Function: Linear, square root, programmable...

Product Data ELECTRONIC PRESSURE MEASUREMENT PRODUCTS Model DDMC Digital Meter/Controller Feature Rich and Flexible The DDMC meter boasts specifications and functionality that clearly make it one of the most advanced process meters available. Its dual-line 6-digit display (999,999), advanced math functions, function keys, Modbus RTU serial communications, and optional expansion modules are only a few of the features found on the DDMC PD6000. The user friendly dual-line display makes the DDMC easy to set up and program. No jumpers to set for input selection. All setup and programming are done...

Product Data ELECTRONIC PRESSURE MEASUREMENT PRODUCTS Model DDMC Digital Meter/Controller Multi-pump Alternation Up to 8 pumps can be aternated and sequenced with the DDMC digital meter/controller. Relay #2 trips the High Level Alarm at 7500 gallons and resets at 6900 gallons. Relay #4 turns the main pump on at 6000 gallons and turns it off at 1000 gallons. With the Pump Alternation feature activated, the next time the level reaches 6000 gallons, relay #3 transfers and starts the backup pump. Relay #1 trips the Low Level Alarm at 495 gallons and resets at 750 gallons. If the backup pump is not...