Product Data ELECTRONIC LEVEL MEASUREMENT PRODUCTS Model 575P Protected Flush Submersible Level Transmitter DESCRIPTION The Model 575P Protected Flush Submersible Level Transmitter has a HASTELLOY C diaphragm in a special, protective flange, for sewage applications. l CSA approved for intrinsically safe operation The unit is specially designed to provide the convenience of direct submergence in many types of liquid, especially wastewater, for quick, accurate and reliable level measurement. The simple design and rugged construction of these solid state instruments provide long lasting service with virtually no maintenance. l Rugged 316 stainless steel housing with excellent The 575P Transmitter indicates the level of liquid by continuously measuring hydrostatic pressure via its sensing element, an ion implanted silicon semiconductor chip with integral Wheatstone Bridge circuit. Once the sensor measures the pressure, the data is transmitted by a 4 to 20 mA output signal. This design provides for excellent linearity and repeatability, low hysteresis and long term stability. l Solid state semiconductor sensor for accuracy and reliability environmental protection l Easy to install and use l 2 wire 4 to 20 mA output l Vented to the atmosphere through the surface end of the cable l Reverse polarity and surge protected l Lightning protectors available l EMI protection available l Optional heavy base model l HASTELLOY C standard flush diaphragm The transmitter is easy to install. Simply lower the transmitter into a tank. All the electronics are mounted in a submersible 316 stainless steel housing. A special cable support bracket is also available. This gives extra stability to the transmitter when used with longer lengths of cable or when used in an agitated liquid.* The transmitters are available calibrated for any span needed, from 0 to 3 psi or 0 to 0.2 bar (0 to 7 feet or 0 to 2.1 meters of water) to 0 to 300 psi or 0 to 20 bar (0 to 690 feet or 0 to 211 meters of water). To complete your liquid level measurement and control system, use the AMETEK Model DDMC Digital Meter/Controller with the 575 Series Transmitters. * A conduit adapter is also available APPLICATIONS l Water/wastewater treatment Sales/Technical Support Telephone: +1 215-355-6900 or e-mail: [email protected] 820 Pennsylvania Boulevard | Feasterville, PA 19053 U.S.A. | Order Fax: +1 215-354-1802 © 2014, by AMETEK, Inc. All rights reserved. Printed in the U.S.A. K780588 – Effective: 6-2014, Supersedes: 8-2008 (110119) Specifications are subject to change without notice. Visit our Web site for the most up-to-date information.

Product Data ELECTRONIC LEVEL MEASUREMENT PRODUCTS Model 575P Protected Flush Submersible Level Transmitter SPECIFICATIONS Feet of Water: 0/14, 0/35, 0/69, 0/138, 0/230, 0/345, 0/460, 0/690 Approvals: Meets CSA requirements for intrinsically safe operation in hazardous locations as designated by Class I, Div 1, Groups A, B, C & D and Class II, Groups E, F & G. Temperature Code T3C (when used with approved barrier). Option: SJB-100 junction box with desiccant; DDMC Meter Controller and Housing PSI: 0/6, 0/15, 0/30, 0/60, 0/100, 0/150, 0/200, 0/300 Output: 4 to 20 mA, 2 wire, current limited to...

Product Data ELECTRONIC LEVEL MEASUREMENT PRODUCTS Flush Submersible Level Transmitter Optional Heavy Base The Model 575P is available with a heavy 4" diameter bottom plate, 3/4" thick for use where turbulence or higher flow rate might require more weight and stabil- ity. Unit can be ordered with this optional base or user may purchase a field conversion kit (P/N K680029). Field conversion does not affect calibration. OPTIONAL CABLE SUPPORT WITH STANDARD NUT/CABLE W-.ITE INTRINStO-: CABLE LENGTH Sales/Technical Support Telephone: +1 215-355-6900 or e-mail: [email protected] 820 Pennsylvania...

Product Data ELECTRONIC LEVEL MEASUREMENT PRODUCTS Model 575P Protected Flush Submersible Level Transmitter Model Numbering: 575 level transmitter 575 Series submersible level transmitter Sensing port P Protected flush Input/Output* B 0 to 6 psi/0 to 0.4 bar (0 to 14 ft./0 to 4.2 m water) 0 to 15 psi/0 to 1 bar (0 to 35 ft./0 to 10.5 m water) 0 to 30 psi/0 to 2 bar (0 to 69 ft./0 to 21.1 m water) 0 to 60 psi/0 to 4 bar (0 to 138 ft./0 to 42.2 m water) 0 to 100 psi/0 to 7 bar (0 to 230 ft./0 to 70.3 m water) 0 to 150 psi/0 to 10 bar (0 to 345 ft./0 to 105.4 m water) 0 to 200 psi/0 to 14 bar (0...