Type T Series Diaphragm Seal Elements for Corrosive Applications
2Pages

{{requestButtons}}

Catalog excerpts

Type T Series Diaphragm Seal Elements  for Corrosive Applications - 1

Diaphragm Seals Type T Series Diaphragm Seal Elements for Corrosive Applications DESCRIPTION Mansfield & Green T Series diaphragm seals have a molded TFE TEFLON® diaphragm making Type TB them ideally suited for a wide range of process media. They are especially well-suited for applications involving corrosive media. Type T Series diaphragm seals employ diaphragms retained between two bolted members. - In the clean-out design, the diaphragms are situated between the top and middle ring. In the plain design, the diaphragms are located between the top and bottom. The diaphragm is self-retained in the upper housing for easy repair or replacement. This extends the life of the seal element and allows for easy replacement and service. The interior of the seal’s upper housing is contoured to accommodate the movement of the diaphragm at maximum deflection, while minimizing distortion. Type T seal elements have a volumetric displacement of .40 cubic inches. FEATURES • Removable molded TEFLON diaphragm - Exceptional long-term value • Continuous duty • Ideal for corrosive applications • Volumetric displacement of .40 cubic inches • Upper contoured housing - Maximum allowable flexing - Minimum diaphragm distortion • Seal ratings to 2500 psig (172 bar) • Available with flushing connection • Available in DIN and metric sizes SEAL CONFIGURATIONS Threaded Seal Elements There are four basic versions of T Series diaphragm seals with threaded attachments. The TB seal element is used for pressure applications only and has a pressure rating of 2500 psig at 100°F (172 bar at 38°C). The TG seal element is similar to the TB seal, except that it has a 1/4 NPT flushing connection. The TA seal element has a standard pressure rating of 2500 psig at 100°F (172 bar at 38°C). The TH seal element is similar to the TA seal element except that it features a 1/4 NPT flushing connection. Flanged Seal Elements There are two basic versions of flanged T Series seal elements. The flange is a standard raised face style. The TC seal element can be supplied in 1/2” and 3/4” with Class 150 thru 1500 ANSI flange ratings. A 1” thru 4” version can be supplied with a Class 150 thru 600 ANSI rating. The TD seal is similar to the TC except it is equipped with a flushing connection. Type TC and TD seal elements are also available in DIN and metric sizes. In-line Flow Thru Seal Elements In-line flow thru T Series diaphragm seals include the TJ versions for 3-1/2” and larger pipe connections. The TK versions are available with 1/4, 3/8, or 1/2 NPT or socket weld process connections. The TM version is for pipe sizes from 3/4” to 2-1/2” Schedule 40 pipe (other schedules available) where the diaphragm seal element is to be directly welded to the process pipe. The TN version is for pipe sizes from 3/4” to 3” requiring ANSI ratings of Class 150 or 300. Class 600 to 2500 available in some sizes. 1” to 3” may be supplied with an optional TEFLON liner. The TP versions are for pipe sizes from 4” to 10” and with ANSI ratings of Class 150 or 300. www.ametekusg.com © 2008, by AMETEK, Inc. All rights reserved. Printed in the U.S.A. 908PDF (160166) ALL ORDERS CAN BE SENT TO: On-line fax: 215-323-9450 or e-mail to usg.sales@ametek.com Sales/Technical Support: 215-257-6531 900 Clymer Avenue Sellersville, PA 18960 U.S.A. Customer Service: 727-536-7831 8600 Somerset Drive Largo, FL 33773 U.S.A. I ^'19001:2000 Specifications are subject to change without notice. Visit our Web site for the most up-to-date information.

Open the catalog to page 1
Type T Series Diaphragm Seal Elements  for Corrosive Applications - 2

FLUSHING CONNECTION Diaphragm Seals Type T Series Diaphragm Seal Elements for Corrosive Applications PROCESS APPLICATION MODEL T SERIES SELECTION GUIDESEAL OPERATING OPERATINGSEAL TYPE MOUNTING TEMPERATURE PRESSURE TA TB TG TH TC TD Thread 100°F (38°C) 2500 psig (172 bar) General Purpose No Flush Thread 100°F (38°C) 2500 psig (172 bar) General Purpose No Flush Thread 100°F (38°C) 2500 psig (172 bar) General Purpose With Flushing Connection Thread 100°F (38°C) 2500 psig (172...

Open the catalog to page 2

All AMETEK PMT Products catalogs and technical brochures

  1. 1981

    4 Pages

  2. Model IPS

    4 Pages

  3. Model 40

    9 Pages

  4. Model 742

    2 Pages

  5. Model 742 D

    3 Pages

  6. Model 89

    2 Pages

  7. Model 89D

    2 Pages

  8. Model-DCT

    5 Pages

  9. Model 88C

    3 Pages

  10. PMT LMA

    3 Pages

  11. L serie

    2 Pages

  12. Model LMA

    3 Pages

  13. ECPT10

    2 Pages

  14. Model IDT

    5 Pages

  15. PST360

    2 Pages

  16. Model 656

    5 Pages

  17. 1535 Gauge

    2 Pages

Archived catalogs